Panasonic KX-TM150ALB operating instructions Settings Programming Summary, Day and Time Adjustment

Page 6

Day/time SUN 12:00AM

FUNCTION=Next

Day/time SUN 12:00AM

FUNCTION=Next

Day/time SUN 1:00PM

FUNCTION=Save

Day/time SUN 1:00PM

PQQX12356ZA-BM 01.3.22 3:56 PM y [ W 10

ÒSettings

Programming Summary

You can program the following functions. See the page numbers below for details.

Press (FUNCTION/EDIT) to enter the programming mode.

			Day/time					To adjust the day and time,
			SUN		12:00AM			To adjust the day and time,
				FUNCTION=Next				see page 11.
				FUNCTION=Next
				Press (FUNCTION/EDIT).


			Number of rings					To select the number of rings,
			:Toll saver					see page 12.
				FUNCTION=Next				see page 12.
				FUNCTION=Next
				Press (FUNCTION/EDIT).


			Remote code					To set the remote code,
		:11						see page 25.
				FUNCTION=Next				see page 25.
				FUNCTION=Next
				Press (FUNCTION/EDIT).

Press VOLUME/SEARCH (^) or (_) for the desired settings.

Press (FUNCTION/EDIT).

³You can exit the programming mode any time by pressing (STOP) or waiting for 60 seconds.

Ò

Day and Time Adjustment

Voice Day/Time Stamp: During playback, a synthesised voice will announce the day and time that each message was recorded.

1 Press (FUNCTION/EDIT) until “Day/time” is displayed.

³The current setting is displayed.

2 Press (SKIP/FF) or (REPEAT/REW) to move the cursor.

³Each time you press (SKIP/FF), the cursor moves in this order:

Day Ò Hour Ò Minute.

3 Press VOLUME/SEARCH (^) or (_) until the desired setting is displayed. ³Each time you press the button, the

display changes as follows.

Day: Sun Ò Mon Ò Tue Ò Wed Ò

ÒThu Ò Fri Ò Sat Ò Sun Hour: 12AM Ò 1AM Ò ... Ò 11AM Ò

Ò12PM Ò ... Ò 11PM Ò 12AM

Minute: 00 Ò 01 Ò ... Ò 59 Ò 00

4 Press (FUNCTION/EDIT).

³A beep sounds and the clock starts working.

³The display will return to the stand-by mode.

³To exit the programming mode, press (STOP) or wait for 60 seconds.

If a power failure occurs or the AC adaptor is disconnected for more than 10 minutes, the adjusted day/time will be erased.

For Caller ID service users (p. 19)

³The Caller ID information will re-set the clock after the ﬁrst ring if the adjusted time is incorrect.

³The Caller ID information will automatically adjust the clock for daylight saving time.

10

11

Image 6

Contents Model No. KX-TM150ALB Operating Instructions Contents Before Initial UseLocation of Controls Display Answer Indicator p , 15 Display p10, 23VOLUME/SEARCH , Buttons p , 14, 15 Record Button pDisplay SettingsEx. Volume level ConnectionsSettings Greeting Message Settings Programming Summary Day and Time AdjustmentFor Caller ID service users p VOLUME/SEARCH Settings Selecting the Number of RingsSetting the Unit to Answer Calls Toll saverMonitoring incoming calls Listening to MessagesAutomatic Answering Operation Listening to only new messagesDuring playback Erasing MessagesListening to Messages Erasing a speciﬁc messageTo check the number of new calls Caller ID ServiceHow caller information is displayed when a call is received For New Zealand Users OnlyPress VOLUME/SEARCH Using the Caller ListEx. When you search from the most recent call Press VOLUME/SEARCH Display meaningUnit can edit a phone number into one of 2 patterns Press VOLUME/SEARCH or repeatedly to ﬁnd the desired callerEditing the Caller’s Phone Number Press FUNCTION/EDIT to select a patternTo erase a speciﬁc caller from the Caller List Using the Caller List Erasing the Caller List InformationSetting the Remote Code Summary of remote operationRemote Operation from a Touch Tone Phone Voice Menu Direct commands Turning on the answering systemSkipping the greeting message ³Press VOLUME/SEARCH to Before Requesting HelpRemedy Installations Environment Safety InstructionsSafety PlacementImportant Information For Australia only InstallationService difficulties Instructions to customer62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan