ÒListening to Messages
³During playback, the display shows which message is being played.
(Ex. While the first message is being played back, Message“ 1” is displayed.)
³At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than
5 minutes.
³All recorded messages are saved until you erase them.
During playback
To repeat/ | To repeat from the beginning of the message |
rewind | Press (REPEAT/REW) briefly. |
message | ³If you press within 5 seconds of playback, the |
| previous message will be played. |
To rewind part of the message
Press and hold (REPEAT/REW) until you reach the desired place.
³At the beginning of the message, 3 short beeps will sound.
To skip/cue | To skip to the next message |
message | Press (SKIP/FF) briefly. |
| To cue to part of the message |
| Press and hold (SKIP/FF) until you reach the desired |
| place. |
| ³The message will be heard at twice the normal speed. |
| ³At the end of the message, 3 short beeps will sound. |
|
|
To stop | Press (STOP). |
operation | ³To resume playback, press (NEW\MESSAGE). |
| ³If you do not press any button for 60 seconds or if you |
| press (STOP) again, the unit will return to the |
| mode. |
For Caller ID service users (p. 19)
After listening to new incoming messages, “”√ will be added to the call entries in the Caller ID Caller List (p. 21).
Erasing Messages
The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when:
Erase some, or all, of the messages. We recommend you erase unnecessary messages after each playback.
Erasing a specific message
Press (ERASE) while the message you want to erase is being played.
³The unit erases the message.
³A short beep will sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
1 | Press (ERASE). |
|
³“Press ERASE again to erase all |
| |
| messages” is heard. |
|
2 | Within 5 seconds, press |
|
(ERASE) again. |
| |
| ³A beep sounds and |
|
| “No messages” is heard. |
|
| ³The display shows |
|
| “0 message”. |
|
| ³After the announcement, the |
|
| display will return to the | (ERASE) |
|
³The information in the Caller List will not be erased. To erase the Caller List information, see page 24.
16 | 17 |