ÒSettings
Selecting the Number of Rings
You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”. Your unit comes from the factory set to “Toll saver”.
Automatic Answering Operation | Ò |
When the unit answers a call, a greeting message is played and the caller’s message is recorded. While recording, “- Answering
³The total recording time (including the greeting message and
1 Press (FUNCTION/EDIT) until “Number of rings” is displayed.
³The current setting is displayed.
2 Press VOLUME/SEARCH (^) or (_) until the desired setting is displayed.
Toll saver: Toll saver* function is
selected.
3 Press (FUNCTION/EDIT). ³A beep sounds.
³The display will return to the
Number of rings :Toll saver
FUNCTION=Next
Number of rings :2
FUNCTION=Save
Number of rings :2
rooms, the time may be shortened by up to 3 minutes.
³A maximum of 64 messages (including the greeting message and
³The maximum recording time per caller is 3 minutes. If a caller records for over 3 minutes, the unit will announce “Thank you for your call” and the call will be disconnected.
Setting the Unit to Answer Calls
Press (ANSWERÐON) to turn on the answering system.
³The ANSWER indicator lights, and “Answer set” and the current day/time are heard.
³The unit will announce the remaining recording time if it is less than 5 minutes.
³If you hear “Memory full”, “Message full” is displayed and the ANSWER indicator flashes rapidly, erase some, or all, of the messages (p. 17).
³To exit the programming mode, press (STOP) or wait for 60 seconds.
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
(STOP)
ANSWER Indicator | VOLUME/SEARCH (^), (_) |
(ANSWER\ON)
12 | 13 |