ÒRemote Operation from a Touch Tone Phone
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end the remote operation, hang up anytime.
Direct commands
NEW MESSAGE | (4) | ³Only new messages are played back. |
PLAYBACK |
| |
ALL MESSAGE | (5) | ³All messages are played back. |
PLAYBACK |
| |
REPEAT | (1) | ³The current message is repeated. |
(During playback) |
| |
SKIP | (2) | ³The current message is skipped. |
(During playback) | The next message is played. | |
STOP | (9) | ³Operation is stopped temporarily. |
| ³To resume operation, enter a direct |
command within 15 seconds, or the voice menu will start.
ANSWERING | (0) | ³“Answer off ” is heard. The unit hangs up |
SYSTEM OFF | and will not answer calls until turned on |
again.
Turning on the answering system
Call your unit and wait for 15 rings.
³The unit will answer and the greeting message will be played.
³The answering system will turn on. Hang up or enter the remote code for other options.
³When turning on the answering system using a rotary or pulse service telephone, you cannot enter the remote code for other options.
Skipping the greeting message
After calling your unit, press ($) during the greeting message.
³The unit skips the rest of the greeting message and you can start recording your message after the long beep.
GREETING MESSAGE RECORDING
(7)
Û
RECORD
Û
(9)
³A long beep sounds.
³After the beep, talk immediately for up to 2 minutes.
³The recording is stopped.
³The recorded message is played.
ERASING A | ($) (4) | ³The current message is erased. |
SPECIFIC | ³A short beep will sound and the next | |
MESSAGE |
| message will be played. |
(During playback) |
| |
|
|
|
ERASING ALL | ($) (5) | ³All recorded messages are erased. |
MESSAGES | ³A beep sounds and “No messages” is heard. | |
28 | 29 |