Vent Mount Method (B)
To assemble and mount the vehicle dock for the vent mount method B as shown in Figure 4:
1.Assemble the vent mount clip as shown in Figure 6. Note that the lower arm may be at- tached in two different positions. You should assemble the vent clip in the configuration that works best in your particular vehicle. Figure 6 illustrates both possible configura- tions of the vent clip.
2.Attach the vent clip to the vehicle dock using the provided screws. (Figure 7)
3.Slide the vent clip portion of the mount into a vent in your vehicle, insuring that one of the vent louvers slides between the upper and lower portions of the two clip arms, and hooks the rear of the louver.
Figure 6
[ Installation ] 19