Pickup Truck Antenna Cable Routing Procedure
Figure 12 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a pickup truck.
2.Continue Tucking Cable Under Molding To Bottom of Windshield
3.Route Cable Out of Molding and Into Weatherstripping Around Door Opening. Continue to Bottom of Door Opening.
4.Bring Cable out from Weatherstripping and Route Under Carpet.
1. Route Cable
Under Rubber
Molding Around
Windshield
5.Bring Cable Out to SIRIUS Radio Location
Figure 12
Follow these detailed cable installation instructions:
1.Use a plastic putty knife or similar tool to lift the rubber molding around the windshield and tuck the antenna cable underneath it.
2.Continue tucking the cable underneath the windshield molding around the windshield to the lowest corner.
3.At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the weather stripping to the bottom of the door opening.
4.Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such