Step 2: Prepare the FEA for temporary installation
Attach the suction cups to the antenna portion of the FEA in the positions shown in Figure
20.The antenna portion of the FEA is the relatively thinner section of the cable in between the bead and the arrow, and transmits the FM signal to your vehicle’s FM antenna.
ARROW | ATTACH SUCTION CUPS AS SHOWN | ||
|
|
| ON BOTH ENDS OF THE THIN WIRE |
|
|
|
|
|
|
|
|
THIS THINNER PORTION OF THE FEA IS
WHAT TRANSMITS THE FM SIGNAL TO
YOUR VEHICLE’S FM ANTENNA
|
|
|
|
|
|
|
|
| CONNECTS TO THE FM OUT | |||
|
| BEAD | ANTENNA CABLE |
| CONNECTOR OF YOUR | |||||||
|
|
| SIRIUS RADIO OR DOCK | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DURING THE FINAL INSTALLATION USE THE CABLE
GUIDES TO HOLD THE CABLE IN POSITION UNTIL
IT REACHES THE INNER TRIM OR MOULDING
Figure 20
Step 3: Temporarily install the FEA using the suction cups for your vehicle’s antenna type
On the next several pages you will find the FEA mounting location for your type of FM antenna (A, B, C, etc.). Before attaching the FEA, clean the area where the suction cups will be mount- ed with the supplied alcohol swab. The antenna wire between the two suction cups should be pulled taut and as straight as possible, and should not obstruct the driver’s view.