Panasonic KX-A272 operating instructions De-Registration

Page 10

De-Registration

In order to perform de-registration, the repeater must have already been registered to a base unit or cell station.

•Ensure that the repeater is switched off (disconnect the AC adaptor) (both LEDs are OFF).

•While holding down the repeater switch, power on the repeater by connecting the AC adaptor. Continue to hold down the repeater switch for 10 seconds. The red LED will flash slowly.

•After 10 seconds the red LED will go steady ON. The Repeater is now de- registered successfully.

•To re-register the repeater, please follow the normal registration process.

10 Operating Instructions

Image 10

Contents Model KX-A272 Table of Contents Overview General SafetyCompatibility Accessories Included EnvironmentWall Mounting ConnectionPlacement LED StatusAutomatic Registration Manual Registration Manual Registration De-Registration Verification Tone Site Survey Mode PBX option only Serial Repeater ID programming PBX option only Serial Repeater ID programming Problem Possible Cause Solution Before Requesting HelpSpecifications Technical InformationConditions of Guarantee Index Operating Instructions 0436