Placement
To get the best performance from the repeater:
•Select a raised position (on wall etc), which is well within range of the Base Unit/Cell Station.
•Avoid positioning the repeater close to objects that will interfere with reception, such as thick walls, radiators, metal shelving etc.
•For maximum distance
•Keep a minimum distance of 10m between repeaters.
•If the Green LED flashes - move the repeater closer to the Base Unit/Cell Station or away from obstructions etc.
LED Status
Red LED (Indicates special states)
On/off/blink specification | Definition |
On | Repeater is not assigned to any system |
Off | Normal Operation |
Slow blinking - “320ms on / 320ms off” | Manual registration mode |
Intermittent blinking “100ms on / 2.4sec off” | Verification mode (Flashes in time with monitor beep |
| tone) |
Green LED (Indicates registration / communications states)
On/off/blink specification | Definition |
On | Repeater successfully registered |
Off | Repeater |
Slow blinking - “320ms on / 320ms off” | Registration process ‘searching’ for Cell Station / |
| unregistered |
Fast blinking - “200ms on / 200ms off” | Repeater ID programming mode / Site Survey mode |
| (PBX application only) |
6 Operating Instructions