Panasonic KX-A272 operating instructions Serial Repeater ID programming

Serial Repeater ID programming continued.

•Ensure that the repeater is switched OFF. (both LED’s are OFF)

•Power ON the repeater.

•Assign the repeater to a base by following either the manual or automatic registration process.

•Bring the repeater into close range of the repeater on the parent level (i.e. when assigning a repeater to chain-level 3, the repeater must be brought into close range with the repeater already set to chain-level 2.).

•Press the switch the corresponding number of times to set the chain-level.

(i.e. 3 times = chain-level 3 etc.).

The red LED flashes a number of times corresponding to the chain level.

NB: Pressing the switch 4 or more times corresponds to chain-level 1.

•After two minutes from power ON, the new chain-level and Radio Fixed Part Identity (R.F.P.I.) are then stored into the repeaters memory, and the repeater returns to normal operation.

•Please note : This function is not available for domestic DECT appliances, only PBX.

14 Operating Instructions