Step
Description
3.Enter the change
∙Service Type: CDR1 [Note: If needed, a secondary link can be defined by setting Service Type to CDR2.]
∙Local Node: procr [Note: Communication Manager will use the processor- ethernet interface to send out the CDR.]
∙Local Port: 0 [Note: The Local Port is set to 0 because Communication Manager initiates the CDR link.]
∙Remote Node: iptm [Note: The Remote Node is set to the node name previously defined in Step 1.]
∙Remote Port: 50000 [Note: The Remote Port may be set to a value between 5000 and 64500 inclusive. 50000 is the default port number used by PROGNOSIS and the PROGNOSIS server uses the same port number for all Avaya Servers sending CDR information to it.]
| change |
|
|
| Page 1 of | 3 | ||
|
|
|
| IP SERVICES |
|
|
|
|
| Service | Enabled | Local | Local | Remote | Remote |
| |
| Type |
| Node | Port | Node | Port |
| |
| CDR1 |
| procr | 0 | iptm | 50000 |
|
|
|
|
|
|
|
|
|
|
|
On Page 3 of the IP SERVICES form, disable the Reliable Session Protocol (RSP) for the CDR link by setting the Reliable Protocol field to n.
change |
|
|
| Page 3 of | 3 | |
|
| SESSION | LAYER TIMERS |
|
|
|
Service | Reliable | Packet Resp | Session Connect | SPDU | Connectivity |
|
Type | Protocol | Timer | Message Cntr | Cntr | Timer |
|
CDR1 | n | 30 | 3 | 3 | 60 |
|
|
|
|
|
|
|
|
JC; Reviewed: | Solution & Interoperability Test Lab Application Notes | 16 of 30 |
SPOC 6/16/2011 | ©2011 Avaya Inc. All Rights Reserved. |