∙ CDR Date Format month/day | Avaya IPTM96-CM601 specification

StepDescription

4.Enter the change system-parameters cdr command to set the parameters for the type of calls to track and the format of the CDR data. The following settings were used during the compliance test.

∙CDR Date Format: month/day

∙Primary Output Format: unformatted [Note: This value is used to configure PROGNOSIS in Section 5 Step 3.]

∙Primary Output Endpoint: CDR1

The remaining parameters define the type of calls that will be recorded and what data will be included in the record. See Reference [2] for a full explanation of each field. The test configuration used some of the more common fields described below.

∙Use Legacy CDR Formats? y [Note: Specify the use of the Communication

Manager 3.x (“legacy”) formats in the CDR records produced by the system.]

∙Intra-switch CDR: y [Note: Allows call records for internal calls involving specific stations. Those stations must be specified in the INTRA-SWITCH-CDR form.]

∙Record Outgoing Calls Only? n [Note: Allows incoming trunk calls to appear in the CDR records along with the outgoing trunk calls.]

∙Outg Trk Call Splitting? y [Note: Allows a separate call record for any portion of an outgoing call that is transferred or conferenced.]

∙Inc Trk Call Splitting? n [Note: Do not allow a separate call record for any portion of an incoming call that is transferred or conferenced.]

change system-parameters cdr					Page 1 of			1
	CDR SYSTEM PARAMETERS

Node Number (Local PBX ID):	1				CDR Date Format:	month/day
Primary Output Format:		unformatted		Primary Output Endpoint:			CDR1
Secondary Output Format:				Secondary Output Endpoint:
Use ISDN Layouts? n					Enable CDR Storage on Disk? n
Use Enhanced Formats? n			Condition Code 'T' For Redirected Calls? n
Use Legacy CDR Formats? y					Remove # From Called Number? n
Modified Circuit ID Display? n					Intra-switch CDR? y
Record Outgoing Calls Only? n					Outg Trk Call Splitting? y
Suppress CDR for Ineffective Call Attempts? y					Outg Attd Call Record? y
Disconnect Information in Place of FRL? n					Interworking Feat-flag? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
			Calls to Hunt Group - Record: member-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Agent ID on Incoming? n			Record Agent ID on Outgoing? y
Inc Trk Call Splitting? n
Record Non-Call-Assoc TSC? n				Call Record Handling Option: warning
Record Call-Assoc TSC? n			Digits to Record for Outgoing Calls: dialed
Privacy - Digits to Hide: 0				CDR Account Code Length: 15

JC; Reviewed:	Solution & Interoperability Test Lab Application Notes	17 of 30
SPOC 6/16/2011	©2011 Avaya Inc. All Rights Reserved.	IPTM96-CM601