Avaya IPTM96-CM601 manual Step Description

Page 22

StepDescription

5.In the Configuration tab, add an entry for each ESS or LSP Servers to be monitored. The template to add the server is provided in the PROGNOSIS GUI application. In this test configuration, the following entries are added for the ESS and LSP Servers with the names LSPREMOTE2 and ESS1 and with the IP addresses of 10.1.40.10 and 10.1.10.239 respectively, both belonging to the AVAYAHQ Communication Manager system.

ADD LSP ( LSPREMOTE2, ip=10.1.40.10, primary-controller=\AVAYAHQ ) ADD LSP ( ESS1, ip=10.1.10.239, primary-controller=\AVAYAHQ )

Click Start to proceed.

JC; Reviewed:	Solution & Interoperability Test Lab Application Notes	22 of 30
SPOC 6/16/2011	©2011 Avaya Inc. All Rights Reserved.	IPTM96-CM601

Image 22

Contents Abstract Introduction General Test Approach and Test ResultsTest Results Interoperability Compliance TestingSupport Reference Configuration Test ConfigurationEquipment and Software Validated Equipment SoftwareConfigure SAT User Profile Configure Communication ManagerStep Description Permissions To. Submit the form to create the user profile Configure Login Group Page Step Description Step Description Configure Login Step Description Configure Rtcp Monitoring Secs toConfigure CDR Monitoring Communication Manager to send out the CDR informationCDR1 ∙ CDR Date Format month/day ∙ Primary Output Endpoint CDR1INTRA-SWITCH CDR Configure Integrated Research Prognosis IP Telephony Manager Step Description Step Description Step Description Step Description Step Description Verification Steps Verify Communication ManagerVerify Integrated Research Prognosis IP Telephony Manager Step Description Conclusion Additional References Avaya Inc. All Rights Reserved