Uniden MHS450 owner manual USA/CAN/INT U.I.C. Settings, Lamp Backlight Adjust

Page 29

LAMP ADJUST Always Off

Timer

Always On Exit

USA/CAN/INT (U.I.C.) — Settings

The radio is set as a factory default to the USA channel frequencies. To change to either Canadian [CAN] or International [INT] channels follow these steps.

1.Press MENU and highlight USA/ CAN/INT. Press ENTER.

.Press either ▲ or ▼ until the country Mode is highlighted. Press ENTER to select it.

UIC CHANNELS USA Mode

Canadian Mode

Intl Mode

Exit

3.Highlight EXIT to exit the menu then press ENTER to return to radio operation.

Note: the radio remembers the last selection setting you make when powered down.

Lamp (Backlight) Adjust

The backlight that provides convenient illumination of the keys and the LCD has three settings.

1. Press ▲ or ▼ to scroll to Lamp Adjust. Press ENTER.

LAMP ADJUST appears at the top of the screen. Highlight either Always Off, Always On, or Timer.

.Press ENTER to select your choice.

3.To set the on-time duration of the backlight, select Timer then highlight either 5 seconds (default), 30 seconds, 1 minute, or 5 minutes then press ENTER. A double beep sounds to confirm your selection.

4.Scroll to EXIT and press ENTER to return to the RADIO MENU menu screen.

Uniden MHS450 Radio Owner’s Manual

29

Image 29

Contents MHS450 Table of Contents Manually Selecting Coast Guard/Distress Using Scan with Triple Watch Follow these steps to get going Quick Start Guide for the MHS450Storing a Channel in Memory One Normal ScanningTripleWatch Scanning DualWatch Scanning= Channel Check FCC/Industry Canada Information Maritime Radio Services OperationFCC RF Exposure Information Lithium Ion Battery Pack Warning What’s Included Belt Clip Alkaline Battery Case HardwareUniden MHS450 Introduction FeaturesPage MHS450 Controls Page Radio Charger Cradle LCD Display Owner Manual Conventions Indicator SoundsBatteries Installing the Lithium Ion Battery PackPage Power AutoSave and Battery Life Indication To Mount the Cradle on a Counter Top Mounting the Charging CradleAttaching the Belt Clip Selecting a Channel Getting StartedTransmitting Transmitting Power LevelUsing the Radio Menu Options Lamp Backlight Adjust USA/CAN/INT U.I.C. SettingsSetting Dual or TriWatch Adjusting Display ContrastSetting the Key Lock Setting the Key BeepManually Selecting Coast Guard/Distress/ Hailing Channels Weather Band at the upper left and the channel number. Using the Weather ChannelsAdding Fips Codes Channel Name Changing Channel NamesUsing the TripleWatch or DualWatch Mode Restoring Default NamesTriple Watch and Dual Watch Only Using Scan with Triple Watch Dual Watch, or Weather AlertBoth Watches and Weather Channel Resetting the MHS450 Using the External Speaker/Mic JackSymptom Cause Remedy TroubleshootingSymptom Cause Remedy PLL SpecificationsCare and Maintenance Ch No RX Freq TX Freq Status Full Name Char Name USA Channel FrequenciesDigital Selective DSC Receive Canadian Channel Frequencies Inhibit International Channel Frequencies Status Full Name Char Name Noaa Weather Same Event Codes Noaa Weather Channels and FrequenciesPage Page Page TXF Transmitter Carrier Warrantor Uniden America Corporation Uniden Three Year Limited WarrantyVisit To Register Your Product