Uniden MHS450 owner manual Changing Channel Names

Page 35
Press the UP or DOWN arrow keys to select the character then press the enter key
COAST GUARD ONLY
05A VTS/Com
Channel Name 01A VTS/Com
03A CG Only

.Once you locate the code for your county or area, use ▲ or ▼ until the correct number appears on the screen then press ENTER to select it.

3.Enter all the codes you wish, then move to EXIT and ENTER to select it. The radio returns to the RADIO MENU screen.

4.Press MENU again to return to the marine mode.

Changing Channel Names

Each channel has a default name which you can change. When a channel is allocated to a specific service, changing the name on your radio can help make identification faster and easier. Or you

can change the name to a member of your boating family such as MOMS CHANNEL. You can use up to 16 characters.

1.From the RADIO MENU, press ▲ or ▼ to highlight

Channel Name.

. Press ENTER. Use ▲ or ▼ to scroll to the desired channel you wish to rename. Press ENTER. Then choose Rename , Default, or Exit. and select it.

3.If you choose Rename, press either ▲ or ▼ until the first letter or number of the new name appears. Press

ENTER to select it and move to the next character.

4. When the name is complete, repeatedly press ENTER until the cursor reaches the right end of the

line. Then press ENTER again. A double beep sounds confirming the change and the display returns to the Channel Name menu. Use ▲ or ▼ to Exit and press

ENTER.

Uniden MHS450 Radio Owner’s Manual

35

Image 35
Contents MHS450 Table of Contents Manually Selecting Coast Guard/Distress Using Scan with Triple Watch Follow these steps to get going Quick Start Guide for the MHS450Storing a Channel in Memory One Normal ScanningTripleWatch Scanning DualWatch Scanning= Channel Check FCC/Industry Canada Information Maritime Radio Services OperationFCC RF Exposure Information Lithium Ion Battery Pack Warning What’s Included Belt Clip Alkaline Battery Case HardwareUniden MHS450 Introduction FeaturesPage MHS450 Controls Page Radio Charger Cradle LCD Display Owner Manual Conventions Indicator SoundsBatteries Installing the Lithium Ion Battery PackPage Power AutoSave and Battery Life Indication To Mount the Cradle on a Counter Top Mounting the Charging CradleAttaching the Belt Clip Selecting a Channel Getting StartedTransmitting Transmitting Power LevelUsing the Radio Menu Options Lamp Backlight Adjust USA/CAN/INT U.I.C. SettingsSetting Dual or TriWatch Adjusting Display ContrastSetting the Key Lock Setting the Key BeepManually Selecting Coast Guard/Distress/ Hailing Channels Weather Band at the upper left and the channel number. Using the Weather ChannelsAdding Fips Codes Channel Name Changing Channel NamesUsing the TripleWatch or DualWatch Mode Restoring Default NamesTriple Watch and Dual Watch Only Using Scan with Triple Watch Dual Watch, or Weather AlertBoth Watches and Weather Channel Resetting the MHS450 Using the External Speaker/Mic JackSymptom Cause Remedy TroubleshootingSymptom Cause Remedy PLL SpecificationsCare and Maintenance Ch No RX Freq TX Freq Status Full Name Char Name USA Channel FrequenciesDigital Selective DSC Receive Canadian Channel Frequencies Inhibit International Channel Frequencies Status Full Name Char Name Noaa Weather Same Event Codes Noaa Weather Channels and FrequenciesPage Page Page TXF Transmitter Carrier Warrantor Uniden America Corporation Uniden Three Year Limited WarrantyVisit To Register Your Product