Uniden MHS450 owner manual Symptom Cause Remedy

SYMPTOM	CAUSE	REMEDY
You can not change the	You are on a channel	Change to an unrestricted
transmit power setting.	which is limited to 1	TX/RX channel.
	watt transmit power
	(e.g. Ch. 13) or you
	are on a "receive
	only" channel (e.g.
	WX).
The SCAN key does	CAUSE 1: No	REMEDY 1: Use the
not start the scan	channels are in the	MEM/SCAN key to enter
function.	scan memory.	desired channels into the
	CAUSE 2: Squelch is	scan memory.
	not adjusted correctly.	REMEDY 2: Adjust the
		squelch to the point that
		background noise just
		disappears.
You can hear	The transmit power is	Use the 1/2.5/5W key to
transmissions, but the	set to low.	select a higher transmit
other radio cannot hear		power setting.
you.

Uniden MHS450 Radio Owner’s Manual 41