Uniden MHS450 owner manual Restoring Default Names, Using the TripleWatch or DualWatch Mode

Page 36

Marine Band 5 Watts

USA Memory

Restoring Default Names

1.If you want to restore all the factory default names, use ▲ or ▼ to highlight Default All located between channel 88A and Exit. Use ▲ or ▼to highlight Yes then press ENTER to restore all the original names. A double beep sounds to confirm the action.

.To restore only one name to default, highlight the channel by using ▲ or ▼then press ENTER. Then use ▲ or ▼ to next highlight Default.

Using the TripleWatch or DualWatch Mode

During setup of your MHS450, you have selected Triple or DualWatch mode. The following shows you

how to use this valuable feature.

1. To activate TripleWatch, from the					A
1. To activate TripleWatch, from the		TRIWATCH
main marine screen, press and
main marine screen, press and
hold 16/9/TRI for about 2 seconds.			2 sec
hold 16/9/TRI for about 2 seconds.
The screen displays TRIWATCH		Marine		Band
		5 Watts

at the bottom and the radio begins		USA
at the bottom and the radio begins
to check two additional channels in		TRIWATCH
rapid sequence every 2 seconds:
the currently selected marine
the currently selected marine		Marine		Band
channel, the backup calling channel		5 Watts
channel, the backup calling channel		USA
9, then the Coast Guard/Distress/
Hailing channel 16, before starting		TRIWATCH
with the current channel again.

.If you selected DualWatch

during setup, when activated, the radio first checks the current channel then it checks channel 16 before returning to the current marine channel. DUALWATCH appears on the display bottom during this cycle.

3.To exit either mode, press and hold 16/9/TRI for about 2 seconds.

36	Uniden MHS450 Radio Owner’s Manual

Image 36

Contents MHS450 Table of Contents Manually Selecting Coast Guard/Distress Using Scan with Triple Watch Quick Start Guide for the MHS450 Follow these steps to get goingStoring a Channel in Memory Normal Scanning OneDualWatch Scanning TripleWatch Scanning= Channel Check Maritime Radio Services Operation FCC/Industry Canada InformationFCC RF Exposure Information Lithium Ion Battery Pack Warning Belt Clip Alkaline Battery Case Hardware What’s IncludedFeatures Uniden MHS450 IntroductionPage MHS450 Controls Page Radio Charger Cradle LCD Display Indicator Sounds Owner Manual ConventionsInstalling the Lithium Ion Battery Pack BatteriesPage Power AutoSave and Battery Life Indication Mounting the Charging Cradle To Mount the Cradle on a Counter TopAttaching the Belt Clip Getting Started Selecting a ChannelTransmitting Power Level TransmittingUsing the Radio Menu Options USA/CAN/INT U.I.C. Settings Lamp Backlight AdjustAdjusting Display Contrast Setting Dual or TriWatchSetting the Key Beep Setting the Key LockManually Selecting Coast Guard/Distress/ Hailing Channels Using the Weather Channels Weather Band at the upper left and the channel number.Adding Fips Codes Changing Channel Names Channel NameRestoring Default Names Using the TripleWatch or DualWatch ModeUsing Scan with Triple Watch Dual Watch, or Weather Alert Triple Watch and Dual Watch OnlyBoth Watches and Weather Channel Using the External Speaker/Mic Jack Resetting the MHS450Troubleshooting Symptom Cause RemedySymptom Cause Remedy Specifications PLLCare and Maintenance USA Channel Frequencies Ch No RX Freq TX Freq Status Full Name Char NameDigital Selective DSC Receive Canadian Channel Frequencies Inhibit International Channel Frequencies Status Full Name Char Name Noaa Weather Channels and Frequencies Noaa Weather Same Event CodesPage Page Page TXF Transmitter Carrier Three Year Limited Warranty Warrantor Uniden America Corporation UnidenVisit To Register Your Product