Uniden UH088SX CB manual Choosing a Priority Channel, Drop-out delay

Page 15

UNIDEN UHF CB Transceiver

Operation

Choosing a Priority Channel

The starting channel, when Group Scanning is initiated, is always the priority channel. Changing the PRI channel setting while scanning

eg: PRI Channel is CH17 (476.825 Mhz)

a press , to select a higher channel (scanning pauses)

- or -

b. press , to select a lower channel

Drop-out delay

While scanning, the uh088sx stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for three seconds for the return of the signal, otherwise, the radio resumes scanning.

13

Image 15

Contents CB Radio Page Contents Tables Selective Calling Optional Selcall PCB RequiredControls/Indicators/Connections Turns the uh088sx power on or OFF and adjusts the volumeUh088sx Indicators Microphone plug is inserted into this socket Back PanelMemory Backup FeaturesPreventative Maintenance TroubleshootingFront Panel Layout Microphone Layout Included with your uh088sx CB radio That no signals get through Weak signals and strong signalsOperation For example PressOnly channels 01 08 are available for Duplex Operating the uh088sx in Duplex ModeOpen Scan OS Mode ScanningEg CH40 becomes active Group Scan GS ModeChoosing a Priority Channel Drop-out delayProgramming Scan Channels Firstly, activate scan mode by pressing Channel Seeking OperationWhen Continuous Tone Coded Squelch System Ctcss Outline Selective Calling Optional Selcall PCB RequiredCtcss Tone List TablesONE Year Limited Warranty WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited