UNIDEN UHF CB Transceiver
Operation
Operating the uh088sx in Duplex Mode
For this example we are adopting CH01 as the channel
being used in your area for repeater use.
Press 
to switch Duplex On. The duplex icon DUP appears. If Duplex is not required - press again to switch Duplex off.
Only channels 01 - 08 are available for Duplex
Check with your local Retailer to determine if there is a Repeater in your area.
Scanning
The uh088sx has a scanning feature that allows you to search for active channels automatically.
Furthermore, the uh088sx is designed to have two types of scanning; Open Scanning (OS) and Group Scanning (GS), to give you flexibility and allow you to use the radio
more effectively. Press and scanning starts. The scan icon SCN appears.
Open Scan (OS) Mode
Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning will stop on that channel.
This example shows CH40 active.
If the received signal ceases, the unit will wait 3 seconds for the signal to return, otherwise scanning resumes.
To skip the active channel, press 
momentarily. Scanning resumes.
To deactivate scan, press 
while scanning or the PTT button on the microphone.
If SCAN is deactivated while on an active channel, the uh088sx will stay on that active channel. If no channels are active, the uh088sx will reinstate the starting channel.
11