Uniden UH088SX CB manual Back Panel, Microphone plug is inserted into this socket

Page 7

UNIDEN UHF CB Transceiver

Controls/Indicators/Connections

CONNECTIONS

FRONT PANEL

23

23.MICROPHONE SOCKET

The microphone plug is inserted into this socket.

BACK PANEL

24

26

25

24.EXTERNAL SPEAKER JACK - used for remote receiver monitoring. When the external speaker is connected, the internal speaker is automatically disconnected. The connecting wire must use a 3.5mm miniature plug only.

25.ANTENNA CONNECTOR - Connect the Antenna here using a standard UHF (PL259) type connector.

26.DC POWER CORD - DC Power is connected to the transceiver through this jack. A power cord is supplied with the transceiver.

5

Image 7

Contents CB Radio Page Contents Tables Selective Calling Optional Selcall PCB RequiredTurns the uh088sx power on or OFF and adjusts the volume Controls/Indicators/ConnectionsUh088sx Indicators Microphone plug is inserted into this socket Back PanelMemory Backup FeaturesPreventative Maintenance TroubleshootingFront Panel Layout Microphone Layout Included with your uh088sx CB radio Weak signals and strong signals That no signals get throughOperation For example PressOnly channels 01 08 are available for Duplex Operating the uh088sx in Duplex ModeOpen Scan OS Mode ScanningEg CH40 becomes active Group Scan GS ModeChoosing a Priority Channel Drop-out delayProgramming Scan Channels Channel Seeking Operation Firstly, activate scan mode by pressingWhen Continuous Tone Coded Squelch System Ctcss Outline Selective Calling Optional Selcall PCB RequiredCtcss Tone List TablesONE Year Limited Warranty WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited