Uniden UH088SX CB manual Continuous Tone Coded Squelch System Ctcss

Page 18

UNIDEN UHF CB Transceiver

Operation

Continuous Tone Coded Squelch System (CTCSS)

This feature allows signals to be received only from callers who have selected the same CTCSS code.

Press or to select the desired channel to use CTCSS.

Press and hold for 2 seconds. CTCSS code flashes.

Pressor to select the desired CTCSS code 01 - 38.

Press once to store the new setting.

To turn CTCSS OFF please follow the above steps but select the desired CTCSS code oF (before code 01).

Channels 05 and 35 are Emergency Channels.

CTCSS cannot be selected on these channels.

If a button is not pressed within 10 seconds the uh088sx will automatically exit Select Mode.

16

Image 18
Contents CB Radio Page Contents Selective Calling Optional Selcall PCB Required TablesControls/Indicators/Connections Turns the uh088sx power on or OFF and adjusts the volumeUh088sx Indicators Back Panel Microphone plug is inserted into this socketTroubleshooting FeaturesPreventative Maintenance Memory BackupFront Panel Layout Microphone Layout Included with your uh088sx CB radio That no signals get through Weak signals and strong signalsOperation Press For exampleScanning Operating the uh088sx in Duplex ModeOpen Scan OS Mode Only channels 01 08 are available for DuplexGroup Scan GS Mode Eg CH40 becomes activeDrop-out delay Choosing a Priority ChannelProgramming Scan Channels Firstly, activate scan mode by pressing Channel Seeking OperationWhen Continuous Tone Coded Squelch System Ctcss Selective Calling Optional Selcall PCB Required OutlineTables Ctcss Tone ListWarranty ONE Year Limited WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited