Uniden UH088SX CB manual Controls/Indicators/Connections, Uh088sx

UNIDEN UHF CB Transceiver

Controls/Indicators/Connections

uh088sx
CONTROLS	19	2		5
			3
				4

10 9 8 7 6

1.LIQUID CRYSTAL DISPLAY (LCD) PANEL - Indicators for TX, CAL, MEM, TSQ, GS (OS), SCN

PRI, Channel Number, Frequency, Signal Strength Level (S), Transmit Power Level (RF),CTCSS Code and DUP.

2.UP/DOWN CHANNEL SELECTOR -These controls are used to select the desired communication channel.

3.ON/OFF, VOLUME & SQUELCH CONTROLS ON/OFF & Volume Control (Centre Knob)

Turns the uh088sx power ON or OFF and adjusts the volume.

Squelch Control (Outer Ring)

Eliminates background noise in the absence of an incoming spiral.

4.PUSH-TO-TALK (PTT) - SWITCH - Press to transmit and release to receive.

5.TONE CALL CONTROL BUTTON - Press to transmit SELCALL codes, it functions on condition that SELCALL option is installed.

6.DUPLEX Control

Press this button momentarily to choose semi-duplex opeartion for channels 1 through 8.

7.OPEN SCAN/GROUP SCAN CONTROL (OS/GS)- Switches operation between OPEN SCAN and

GROUP SCAN Mode.

8.SCAN CONTROL (SCAN) - Press to activate Normal OS/GS scanning or press and hold to enable Seek Mode OS/GS Scanning.

3