
9 Memory mode
9. MEMORY MODE
This chapter describes the Memory mode designed to record in real time into the internal memory the measures achieved on the channels.
You can trigger the start and stop of the plotting under various conditions.
You can activate a simultaneous saving of the measurements in an internal memory or in a file.
9.1. Configuration | and triggering of the acquisition |
Press the Trigger
key.
Definition of the acquisition into internal memory.
Sample Rate: sampling rate of the channels
-internally rated from 1 s to 20 min
-externally rated through the logical channel 16
Blocks: division of the internal memory into blocks
-1, 2, 4, 8, 16, 32, 64 or 128
Page 1