Reloadings, real-time savings, MEMSpeed | Escort 3008B, 3016B, 3004B

				15	Ethernet interface
	14.5.9.Memory mode

	HEADER		PARAMETERS	EXAMPLES
	MEMSpeed	P1,P2		MEMSPEED 10,MICRO
		Defines the sampling period		Period of 10	sec
		P1	= Period ( from 1 to 500)
		P2	= MICro,MIli,Sec,Min or HOur unit
	MEMSpeed:EXT	External clock using

	MEMSpeed ?	Returns the sampling period
	MEMBloc	P1		MEMBLOC 4
		Defines the number of blocks		4 blocks
		P1	= 1,2,4,8,16..128

	MEMBloc ?	Returns the number of blocks and the validity of them		:MEMBLOC 4,2 : we have 4 blocks with
				2 valid blocks

	POSTrig	P1,P2		:STOP:AUTO;POSTRIG 0
		Defines the triggering position within the record		Record after triggering
		P1	= from -100 to +100 in %
		P2	= disable trigger while pretrigger OFF,ON

	POSTrig ?	Returns the triggering position
	MEM:CONT	P1,P2
		Defines the action after recording
		P1	= PLot ,NOPlot : plot or not
		P2= FIle ,NOFile : file save or not
	MEM:CONT ?	Returns the action after recording
	FILE:NAMe	P1,P2		:FILE:NAME BIN,"FileO";LENG
		Name of the file to save		LIM;LENG:LIMIT 10,MS
		P1=BINary,TEXTe : file format
		P2	: name of file (max 12 caracteres)
	FILE:NAMe ?
	FILE:LENGth	P1,P2
		Defines the file size limit
		P1=from 1 to 1000
		P2=KSample or MSample

	FILE:LENGth ?	Returns the file size limit

14.5.10.Reloadings, real-time savings

HEADER	PARAMETERS	EXAMPLES
REARm	P1	REARm SINGLE
	Defines the rearming
	P1 = SINgle,AUTo,SETup

REARm:SETup	P1	REARM SETUP;REAR:SETUP 2
	Number of setup to load	Load setup 2
	P1 = 1 ? 15
REARm ?	Returns the kind of rearming
SAVE	P1	SAVE DISK
	Real time saving in file
	P1 = NO, DISk or MEMOry
	NO : no file
	DISK : save on HDD or USBKey
	MEMOry ( only in DIRECT mode)
SAVE ?	Returns the kind of real time file save
SAVE:MEM	P1,P2	SAVE MEM;SAVE:MEM
	Defines the triggering of memory record in DIRECT mode	TRIG,NOC;:TRIG:CHAN A2,S1,POS
	P1= DIRect,TRIG or MANual
	P2=CONt,NOCont : rearming
SAVE:MEM ?	Returns the kind of memory triggering in DIRECT mode

Page 17

Image 115

Escort 3008B, 3016B, 3004B user manual Reloadings, real-time savings, MEMSpeed

Contents

Recorders Page Page Page Garanty Page Contents Diagrams Inputs / Outputs Appendix Page Important informations Symbols and definitionsImportant Information Security instructions Conformity and restrictions of the appliance Symbols that appear in this manualSymbols that appear on the appliance See chapter Technical specifications Presentation Presentation Presentation Escort 3016B and Escort 3004B Rear side or top side Description of the screen Front side Keys Thumb Wheel F1 Modify Updating the Internal Software Initialisation Initialisation and Precautions of USE Fuse Initialisation Storage precautions of the records Initialisation Power up of Escort 3008B Initialisation Power up of Escort 3016B and Escort 3004B Configuration on POWER-UP Measure of temperature with a PT100 Measure of temperature with a thermocoupleMeasure of voltage Connection of the grounding Measure of intensity Menu key Calibration Offset Routine maintenanceCalibration of the offsets Unplug the appliance before any intervention Menu key Reload Factory Coeff Factory adjustement Initialisation and precautions of use Use Mode key Help key Set up key Use Escort 3008B recorder only Chart key Analogical channels Channels set up key Use Use Logic channels Channel on/off key Display key Display Ft oscilloscope modeVertical or horizontal sweep on screen Use Digital display Direction keysUse Display XY  Y channel Trigger key  Blocks and Files Replay key Start/Stop key Paper-feed key Diagrams Diagrams Positions of the channels Change diagrams Single / Several thresholds TriggersTriggers Trigger key, parameters Start and Stop Single threshold Triggering with analogical channels Triggers Several thresholds Triggers Trigger according to thresholds Triggers Trigger according to the slope Triggering with logical channels Definitions Mathematical CalculationsMathematical calculations Types of calculations High MinimumMaximum Low   V WidthCyclical RMS Configuration of the plotting Direct ModeDirect mode Direct mode Triggering plotting Direct mode Writing data Rearmament of the plottingExample of plotting program  Channels set up key Configuration Triggering of the acquisition Memory ModeMemory mode Manual with the F2 key Urge triggering Sampling periodTrigger Triggering position Internal memory, blocks Recording Double Trigger mode Memory mode Memory mode Memory output Memory mode Configuration and triggering of the acquisition 10. GO/NOGO Mode10 Go/Nogo mode Creation of the frame Memory Mode 10 Go/Nogo mode Channels for Go/Nogo selected in the Trigger Use of the frame Configuration and start of the acquisition File ModeFile mode Binary file LimitsAscii file File mode General File ManagementFile management Management of the configuration files Saving the configuration files Saving the acquisitions File management Loading the configuration filesManagement of the acquisition files Press the Load from disk key Real time File management Loading the acquisition files PC Software for Analysis File management File transfer with FTP File management Display with Escortview File management ESCORTview Myfile.rec /x Printing Plot set up and launchReplay , key Setup Plot Printing with Escort 3016B and Escort 3004B Printing Printer Setup Printing Pin no Input or Ouput Supplementary input / output connectorInputs / Outputs Inputs / Outputs External clock Logical inputs13.1.1.Use Plotting and display 13.1.2.Use Alarm outputsPower supply output Keyboard input Not used. Reserved to future applications Mouse inputXGA screen output 14.8. RS232 Ethernet RJ45 interface USB Interface Interface Ethernet Ethernet InterfaceEthernet interface Format of the reception messages Programming languageSyntax of a reception message Data Syntax of a message unit Ethernet interface Format of the emission messages Text data Standard instructions Structure of the status data Indication of the status of the appliance Status register Registers of service request Registers of standard events Validation register Register of the alarms Example Using the structure of status data Programming dictionary Setup CHAnnel Ethernet interface Parameters of the channels Functions of the channels and between the channels Changing modeCurrent function Header Parameters Examples Directplot Ethernet interface Chart Starttrig Triggerings Header Parameters Examples Triglog P1 Ethernet interface Triggers MEMSpeed Reloadings, real-time savings RECord Ethernet interface Launching plotting and recording Replay memory output Ethernet interface Direct display Ethernet interface Service request Error messages Ethernet interface Isolated inputs Technical Specifications Sampling Technical specifications Temperature recordingBandwidth Type of measurements Multiplexed inputs Calibre Supplementary inputs / outputs Display Alarm outputsExternal power supply Paper Environmental conditions Escort 3008B File acquisitionCommunication interface Miscellaneous Environmental conditions Escort 3016B & Escort 3004B Technical specifications Dimensions, weight Accordance test Electromagnetic compatibility Internal saving battery 16.13.3 Expandable items Accessory items16.13.2 Optional accessory items Items furnished with the appliance Voltage-type inputs AppendixInformation about the ranges of the inputs Appendix Thermocouple K type input Appendix Thermocouple J type input Thermocouple S type input Appendix Thermocouple T type input Thermocouple E type input Appendix Thermocouple B type input Thermocouple W5 type input Appendix Thermocouple N type input Example of Accuracy Calculation Accuracy of the thermocouple measurements Accuracy of the PT100 measurements Temperature CSlope V/ C Accuracy class index of class