3 Initialisation

3.2.3. Power up of ESCORT 3016B and ESCORT 3004B

Power-up of the recorders ESCORT 3016B and ESCORT 3004B is proceeded from the right side of the appliances with the On/Off switch to the side marked "I".

A LED marked "ON" on the front side on the keyboard will confirm the power-up of the appliance.

ON/OFF switch

Power-up LED

After initialisation of the internal software, the recorder will display an introducing window with:

-the version of the software:

Version x.y

-the number of channels:

6 ,12, 18 or more

then enters automatically the DISPLAY mode (oscilloscope).

3.3.CONFIGURATION ON POWER-UP

On power-up, the appliances run under the latest configuration at switching-off (either normal or after power shut-down).

If no configuration is run at power-up, contact the after-sales service

In case of wrong initial configuration, you can start the appliance with the default configuration :

you must press the key

F1

until display of the initialising page.

Page 3.4

Page 24
Image 24
Escort 3008B user manual Configuration on POWER-UP, Initialisation Power up of Escort 3016B and Escort 3004B