8Direct mode
Mode: choice of the printing mode
-F(t): printing a graph versus the time
-Numeric: printing digital values of the measures in a table
Paper speed: printing speed
-internally rated feed from 1 mm/h up to 200 mm/s
-externally rated feed through the logical channel 16
Grid Pattern: definition of the grid pattern plotted on the paper
-none, every 5 mm, 10 mm or with an integer number of divisions
-fine or wide, i.e. with or without subdivisions
-access to the 
Change Diagrams 
to organise the presentation of the channels on the paper (see chapter Diagrams)
Title: giving a title (max. 124 characters) for printing. It will appear at the top of the paper sheet.
Time: type of time reference, printed at the beginning of the plotting and with every annotation
-absolute:
-relative: setting to zero at the beginning of the plotting, printing the elapsed time after each new annotation.
Boundary: possibility to write the limits of each channel
Annotation: possibility to have annotations while printing
-no, at the beginning of the plotting, on an alarm or on a length of paper
-made of the name, the number, the current value or the range of the channels
Write Message: you can also write a text directly on the paper
-after entering your text, press the 
Write 
key: the text will be immediately plotted on the paper
-if the plotting has begun, it will be paused and will start again when the line is written.
Plot a BMP file: you can write a file under BMP format (bitmap windows). The BMP file must be single colour (height 2000 pixels maximum).The must be on the hard disk, and can be copied with an USB key or via ftp link
.
Page 2
