6 Triggers

6.1.Triggering with analogical channels

After selection of the triggering with analogical channels, the following line on screen will allow you to set parameters for the triggering start condition. It will depend on the selection of only one threshold or of several thresholds.

6.1.1. Single threshold

Channel: selection of the channel on which the triggering start threshold is assigned

Threshold 1 / Threshold 2: selection of the threshold to parameter; each channel is tested with two thresholds. You can, for example, program a start condition on the channel A1 and the Threshold 1, and a stop condition on the same channel A1 and the Threshold 2.

Front: selection of the active front for the threshold

For example, the condition A1 (s1 ): 0.000 V becomes TRUE when the channel A1 turns higher than 0V.

Threshold value: value of the selected threshold in percentage and true value (taking into account the current unit and scale in the configuration of the selected channel)

Fine / Coarse: selection of the fine or coarse setting of the selected threshold

Page 2

Page 50
Image 50
Escort 3004B, 3016B, 3008B user manual Triggering with analogical channels, Single threshold