
4 Use
Alarm B: use of the B alarm output (logical
-Without: no condition is controlling the output; it remains always low (0V)
-Trigger: control by association of the analogical or logical channels on several thresholds (cf. chapter Triggering)
-Paper error: control by lack of paper or opening of the door of the printing block (ESCORT 3008B only)
In any case, the output is low (0V) if the condition is true.
Alarm C: id. Alarm B
Date modification: setting the hour and date for the appliance
Ethernet: modification of the TCP/IP address and of the address mask
Position Max of bargraph : moving direction of the bargraph of each channel on the screen
-Right : maximum value of the channel on the right
-Left : maximum value of the channel on the left
Electrical adjustment: calibration of the offsets of the channels, return to the factory adjustments
Software update: updating of the internal software (see chapter Presentation)
The window at the bottom of the screen shows:
-The current TCP/IP address
-The number of the current version of the internal software
-The number of detected channels
Page 4