4 Use
4.10. 
Replay 
key
Display on screen of the acquisitions available in internal memory or in files on hard disk or USB key.
This function has the same commands as the 
Display 
function.
The only difference is the 
Blocks and Files 
command that allows you to select the memory block (zone in the internal memory divided in blocks) or the file to display.
Blocks and Files:
-Number block: number of the memory block to display
-Load file: choice of the file to display
-Load configuration: copy of the configuration of the acquisition being displayed
into the current configuration (validated channels, ranges )
-Save Disk: saving the current display into a file
-Reference: comparison of blocks versus a reference block (Memory mode); the traces of the reference block are shown in dots
Page 14
