Technical Specifications, Isolated inputs | Escort 3016B, 3008B

16 Technical specifications

16.TECHNICAL SPECIFICATIONS

16.1.Isolated inputs

16.1.1.General characteristics
Number of inputs per module: 6
Impedance:
Impedance > 25 M for ranges  1 V
Impedance = 1 M for any other range
Maximum possible voltages:
Between a measure channel and the ground:	+ 500 V DC or 500 V AC 50 Hz
Between the 2 terminals of a channel:	+500 V DC or 500 V AC 50 Hz
Category of installation: overvoltage category: III 600V

Isolation: between the ground and the measure channel: >100 M at 500 V DC.

Spurious common mode voltages: test according to EN 61143

Types of measures :

Voltage, current (by external shunt)

Frequency

Thermocouple probe J, K, T, S, B, N, E, W5

16.1.2.Voltage recording
Maximum range	1000 V	(-500 V to +500 V)
Minimum range	1 mV	(-0.5 mV to +0.5 mV)
Offset	Adjustment of the centre by 1/5000 of the full scale or by -range
Maximum offset	+ 5 range (except 1000V)
Accuracy	0.1% of the full scale, 10 V, 0.1% of the zero offset
Offset drift	100 ppm/ C, 1 V/ C
Class C index	see appendix
16.1.3.RMS recording

RMS calculation by the software

Resolution	200 s
Maximum frequency	500 Hz
Crest factor	2.2 and 600 V max instant.
Accuracy	1 % (wave signal)
Response time	typical. 100 ms
Measurable max. voltage	424 V AC

Page 1

Image 120

Escort 3016B, 3008B, 3004B user manual Technical Specifications, Isolated inputs

Contents

Recorders Page Page Page Garanty Page Contents Diagrams Inputs / Outputs Appendix Page Symbols and definitions Important InformationSecurity instructions Important informations Symbols that appear in this manual Symbols that appear on the applianceSee chapter Technical specifications Conformity and restrictions of the appliance Presentation Presentation Presentation Rear side or top side Escort 3016B and Escort 3004B Front side Description of the screen Keys Thumb Wheel Updating the Internal Software F1 Modify Initialisation and Precautions of USE Initialisation Initialisation Storage precautions of the records Fuse Initialisation Power up of Escort 3008B Configuration on POWER-UP Initialisation Power up of Escort 3016B and Escort 3004B Measure of temperature with a thermocouple Measure of temperature with a PT100Measure of voltage Measure of intensity Connection of the grounding Routine maintenance Calibration of the offsetsUnplug the appliance before any intervention Menu key Calibration Offset Factory adjustement Menu key Reload Factory Coeff Initialisation and precautions of use Mode key Use Help key Set up key Use Chart key Escort 3008B recorder only Channels set up key Analogical channels Use Use Logic channels Channel on/off key Display Ft oscilloscope mode Display keyVertical or horizontal sweep on screen Use Direction keys Use Display XY Y channel Digital display Trigger key Replay key  Blocks and Files Start/Stop key Paper-feed key Diagrams Diagrams Positions of the channels Change diagrams Triggers TriggersTrigger key, parameters Start and Stop Single / Several thresholds Triggering with analogical channels Single threshold Triggers Several thresholds Triggers Trigger according to thresholds Triggers Trigger according to the slope Triggering with logical channels Mathematical Calculations DefinitionsMathematical calculations Types of calculations Minimum MaximumLow High Width   VCyclical RMS Direct Mode Configuration of the plottingDirect mode Direct mode Triggering plotting Direct mode Rearmament of the plotting Writing dataExample of plotting program  Channels set up key Memory Mode Configuration Triggering of the acquisitionMemory mode Sampling period Manual with the F2 key Urge triggeringTrigger Internal memory, blocks Triggering position Double Trigger mode Recording Memory mode Memory mode Memory output Memory mode 10. GO/NOGO Mode Configuration and triggering of the acquisition10 Go/Nogo mode Memory Mode Creation of the frame 10 Go/Nogo mode Use of the frame Channels for Go/Nogo selected in the Trigger File Mode Configuration and start of the acquisitionFile mode Limits Binary fileAscii file File mode File Management GeneralFile management Management of the configuration files Saving the configuration files File management Loading the configuration files Management of the acquisition filesPress the Load from disk key Saving the acquisitions Real time PC Software for Analysis File management Loading the acquisition files File management File transfer with FTP File management Display with Escortview File management ESCORTview Myfile.rec /x Plot set up and launch Replay , key Setup PlotPrinting with Escort 3016B and Escort 3004B Printing Printing Printer Setup Printing Supplementary input / output connector Inputs / OutputsInputs / Outputs Pin no Input or Ouput Logical inputs 13.1.1.UsePlotting and display External clock Alarm outputs Power supply outputKeyboard input 13.1.2.Use Mouse input XGA screen output14.8. RS232 Not used. Reserved to future applications USB Interface Ethernet RJ45 interface Ethernet Interface Interface EthernetEthernet interface Programming language Format of the reception messagesSyntax of a reception message Syntax of a message unit Data Ethernet interface Format of the emission messages Standard instructions Text data Indication of the status of the appliance Structure of the status data Registers of service request Status register Validation register Registers of standard events Register of the alarms Using the structure of status data Example Setup Programming dictionary Ethernet interface Parameters of the channels CHAnnel Changing mode Functions of the channels and between the channelsCurrent function Ethernet interface Chart Header Parameters Examples Directplot Triggerings Starttrig Ethernet interface Triggers Header Parameters Examples Triglog P1 Reloadings, real-time savings MEMSpeed Ethernet interface Launching plotting and recording RECord Ethernet interface Direct display Replay memory output Error messages Ethernet interface Service request Ethernet interface Technical Specifications Isolated inputs Technical specifications Temperature recording SamplingBandwidth Multiplexed inputs Type of measurements Supplementary inputs / outputs Calibre Alarm outputs External power supplyPaper Display File acquisition Communication interfaceMiscellaneous Environmental conditions Escort 3008B Technical specifications Dimensions, weight Environmental conditions Escort 3016B & Escort 3004B Electromagnetic compatibility Accordance test Internal saving battery Accessory items 16.13.2 Optional accessory itemsItems furnished with the appliance 16.13.3 Expandable items Appendix Information about the ranges of the inputsAppendix Voltage-type inputs Appendix Thermocouple J type input Thermocouple K type input Appendix Thermocouple T type input Thermocouple S type input Appendix Thermocouple B type input Thermocouple E type input Appendix Thermocouple N type input Thermocouple W5 type input Accuracy of the thermocouple measurements Example of Accuracy Calculation Temperature C Accuracy of the PT100 measurementsSlope V/ C Accuracy class index of class