Using #77 Instant Activation Mode (cont’d)
Additional Commands |
| |
Action Code | Action Specifier | |
77 | Access Point Group Enable | Group # |
78 | Access Point Group Disable | Group # |
To enter the Instant Activation Mode:
Enter your security code, then press the
#
key followed by 77.
ACTION ?
ARE YOU SURE ? | ||
1 = YES | 0 = NO | 0 |
| ||
QUIT MENU MODE? | ||
1 = YES | 0 = NO |
|
Enter the code for the desired action. The action codes are the events that are to take place when either the system exits the #77 Mode or the scheduled time is reached, depending on the action selected.
Press [✳] to continue.
Enter the action specifier. This defines what the action will affect (relay, relay group, partition, zone list, user group). The action specifier screen prompt varies, depending on the type of action selected.
As an example, if you selected “Auto Bypass” as the action, the action specifier prompt would be:
ZONE LIST ?
Enter 1 (YES) or 0 (NO).
Press [✳] to continue.
Enter 1 (YES) or 0 (NO).
Press [✳] to continue.
