Honeywell VISTA250BPT, VISTA128BPT, 128BPTSIA manual Speed Key Macros cont’d, Executing

Speed Key (Macros) (cont’d)

key is unnecessary. The system interprets the use of the

Key sequence as its designated function only.

#

key in a Speed

Executing

To execute a Speed Key sequence, do the following:

If a lettered key, A-B-C has been assigned as a Speed Key, press and hold down the appropriate key (about 2 seconds). If a user code is required for any part of the Speed Key sequence, the following prompt appears. Otherwise, the Speed Key sequence automatically begins.

ENTER USER CODE

✴✴✴✴

Enter your user code. The defined Speed Key sequence will begin automatically.

To activate a Speed Key not assigned to the A-B-C keys, press and hold down the [D] key for 2 seconds until the following prompt appears:

ENTER SPEED KEY #

01-32 00=QUIT

Enter the desired Speed Key number.

If a user code is required for any part of the Speed Key sequence, the following prompt appears. Otherwise, the Speed Key sequence automatically begins.

ENTER USER CODE

✴✴✴✴

Enter your user code. The programmed Speed Key sequence will begin automatically.

– 45 –