Honeywell 128BPTSIA, VISTA250BPT, VISTA128BPT manual Speed Key Macros, Defining, Enter Speed KEY #

Speed Key (Macros)

General Information

The “A”, “B”, “C”, and/or “D” keys can be used to activate a string of commands up to 32 keystrokes each. These commands are known as a macro and are stored in the system’s memory. Typical Speed Key functions include:

•Arming sequences that involve first bypassing certain zones before arming.

•Seldom used but repeatable sequences.

•Relay activation sequences.

NOTE: If a speedkey function includes an arming sequence and the user executing it has global arming, all partitions the user can global arm will arm.

Defining

To program a macro, enter your user code +

appears:

ENTER SPEED KEY #

#

+ [D]. The following

01-32 00=QUIT

Enter the 2-digit Speed Key number (01-32) being defined and press [*]. Enter up to 32 keystrokes. A Speed Key sequence can include different commands. Press the "D" key to separate different commands. For example, you may want to perform the following sequence.

GOTO partition 2	Enter	*2
Bypass zones 10 & 11	Press bypass [6], then the zone numbers 010
	& 011
Arm in maximum mode	Press maximum [4] key
Return to partition 1	Enter *1

To program that Speed Key sequence, type the following:

*2 D 6010011 D 4 D *1 D D

Note that the "D" key is pressed after each command. Press "D" twice to complete the entry and exit.

NOTE: When defining Speed Key sequences, do not use the

#

key to

represent Quick Arming. The system uses the code entered in response to the prompt to initiate commands in a Speed Key sequence, so the quick arm

– 44 –