Manuals / Honeywell / Household Appliance / Home Security System

Honeywell VISTA250BPT manual Disarming and Silencing Alarms, Using the 1 OFF Key, Memory of Alarm

Models: VISTA250BPT 128BPTSIA VISTA128BPT

1 80

Download 80 pages 21.98 Kb

Page 39

Disarming and Silencing Alarms

Disarming and Silencing Alarms

Using the 1 OFF Key

The OFF key is used to disarm the system and to silence alarm and trouble sounds. See "SUMMARY OF AUDIBLE NOTIFICATION" section for information which will help you to distinguish between FIRE and BURGLARY alarm sounds.

IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will beep rapidly upon entering, indicating that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

To disarm the system and silence burglary or fire alarms:

1. Enter your security code and press

DISARMED

READY TO ARM

OFF

1.

2.The Ready message will be displayed (if no alarms have occurred while armed) and the keypad beeps once to confirm that the system is disarmed.

IMPORTANT: It is not necessary to press the “OFF” key on the keypad to disarm the system when it is in entry delay or alarm. Entering a valid user code alone causes the system to disarm. All other times pressing the “OFF” key is needed. This is a SIA CP-01 requirement.

If an invalid code is entered to silence an alarm condition, the keypad stops beeping for 10-15 seconds. If a valid code is not entered during the 10-15 seconds, the keypad resumes beeping.

Memory of Alarm

The keypad displays the zone number and type of alarm for any zone that has an alarm condition. These messages will remain displayed until cleared by a user. If an alarm has occurred, note the zone number displayed on the keypad and repeat step 1 above to clear the "Memory of Alarm" and restore the Ready message display. If the Ready message does not display, go to the displayed zone and remedy the fault (close windows, etc.). If the fault cannot be remedied, notify the alarm agency.

If the system was armed when the alarm occurred, repeat step 1 twice: once to disarm the system, a second time to clear the display.

– 39 –

Image 39

Honeywell VISTA250BPT, VISTA128BPT, 128BPTSIA manual Disarming and Silencing Alarms, Using the 1 OFF Key, Memory of Alarm

Contents

VISTA-128BPT VISTA-250BPT VISTA-128BPTSIA Commercial Burglary Partitioned Security SystemWith Scheduling User Guide Page TABLE OF CONTENTS Page General System OverviewZones AlarmsSystem Overview cont’d A Partitioned SystemSystem Overview cont’d Memory of AlarmBurglary Protection Features For Each Arming ModeSpeed Key Macros Using SchedulesDevice Timers To Access another Partition GOTO CommandSelf-HelpFeature Phone Access & Voice Response CapabilitySystem Overview cont’d About The Keypads The Alpha KeypadGeneral LEDS Functions of the KeypadB CD SPEAKERindividual Functions of the Keypad cont’d6 BYPASS RemovesFunctions of the Keypad cont’d General Information Entry/Exit DelaysQuick Arming Installer Code LockoutSecurity Codes and Authority Levels Duress CodeAuthority Levels Security Codes and Authority Levels cont’dGeneral Rules on Authority Levels and Changes To Exit User Edit ModeSecurity Codes and Authority Levels cont’d To Add a User Security Codes and Authority Levels cont’dCODE PART.2 - SHOP? 0 = NO , 1 = YES MULTI-ACCESS? 0 = NO , 1 = YESSecurity Codes and Authority Levels cont’d GLOBAL ARM ? 0 = NO , 1 = YESSecurity Codes and Authority Levels cont’d To Change a Users CodeSecurity Codes and Authority Levels cont’d To Delete a UserARM P 1 2 3 4 5 6 7 8 HIT Accessing Other PartitionsTo Access another Partition Global ArmingAccessing Other Partitions cont’d Global Arming NotesMaster Keypad Operation Accessing Other Partitions cont’d WHSE DISARMED HIT ∗ FOR FAULTSFAULT 002 LOADING DOCK WINDOW Accessing Other Partitions cont’d Common Lobby OperationOther Methods of Arming/Disarming How User Codes Affect the Common LobbyCodes with “Global” Arming Codes with “Non-Global”ArmingChecking For Open Zones Using theTo show faulted zones Typical fault displayREADY Key Displaying All Zone Descriptorsdescriptors can be displayed Using theBypassing Protection Zones 6 BYPASS KeyUsing the Viewing Bypassed Zones To use the Quick Bypass featureBypassing Protection Zones cont’d Quick BypassTo use the Group Bypass feature Group BypassBypassing Protection Zones cont’d Bypassing Protection Zones cont’d Zones Remaining Bypassed After DisarmingUsing the With Entry Delay ONArming Perimeter Only STAY keyWith Entry Delay ON cont’d Auto-STAYArmingArming Perimeter Only Arming Perimeter Only With Entry Delay OFFINSTANT Key Using theUsing the 2 AWAY Key Arming All ProtectionWith Entry Delay ON Arming All Protection MAXIMUM KeyWith Entry Delay OFF Using theUsing the # + 9 Keys Quick ExitTo Quick Exit the premises Disarming and Silencing Alarms Using the 1 OFF KeyMemory of Alarm To arm in the STAY mode, turn the Using the KeyswitchArming DisarmingChime Mode 9 KeyUsing the General Information Viewing Alarm Company MessagesUsing Panic Keys Panic KeysActive Panic Functions Speed Key Macros DefiningGeneral Information Executing Speed Key Macros cont’dAccess Door Control General InformationExecuting General Information Using #70 Relay Menu ModeUsing Schedules Delaying the Closing TimeTemporary Open/Close Schedules Using Schedules cont’d Programming Temporary SchedulesTo program temporary schedules DAYS ? MTWTFSS HIT Using Schedules cont’dProgramming Device Timers To enter the device timer menu modeGeneral Information Programming Device Timers cont’d Programming Device Timers cont’d Randomize Output Device TimesAction Code Using #77 Instant Activation ModeAction Code Action SpecifierAction Code Using #77 Instant Activation Mode cont’dAction Code Action SpecifierAction Code To enter the Instant Activation ModeUsing #77 Instant Activation Mode cont’d Additional CommandsTypical Event Log Display Event Log Procedures1.Enter CODE + # + 6 + 2.Select the display mode 3.Select the partitionTypical Event Log Procedures continuedALARM EVENT LOG 5.To EXIT the Event Log Press ∗ at any timeSetting the Time and Date Using the Testing the System To Be Conducted WeeklyTesting Your System TEST KeyFire Alarm System In Case Of Fire AlarmSilencing a Fire Alarm Typical Trouble Displays Trouble ConditionsPower Failure Trouble Conditions cont’dSERVICING INFORMATION Recommendations for Smoke and Heat Detectors Recommendations for Proper ProtectionRecommendations for Proper Protection cont’d Recommendations for Proper Intrusion ProtectionIn addition, we recommend the following Emergency Evacuation Replacing Batteries in Wireless Sensors Maintaining Your SystemTaking Care of Your System Silencing Low Battery Warning Tones at the Keypad Maintaining Your System cont’dRoutine Care COMMENTS Quick Guide to System FunctionsPROCEDURE FUNCTIONCOMMENTS Quick Guide to System Functions cont’dPROCEDURE FUNCTIONa. DISARM SYSTEM OR ALARM WILL OCCUR is Summary of Audible NotificationAlpha Display Keypads c. DISARM SYSTEM OR ALARM WILL OCCUR isINDUSTRY CANADA CLASS B STATEMENT IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMSFEDERAL COMMUNICATIONS COMMISSION STATEMENTS FCC CLASS B STATEMENTPage DOC STATEMENT CANADIAN DEPARTMENT OF COMMUNICATIONSTHE LIMITATIONS OF THIS ALARM SYSTEM Index Page TWO YEAR LIMITED WARRANTY Page Ê800-06905EŠ 2 Corporate Center Drive, SuiteP.O. Box 9040, Melville, NY