Access Door Control
General Information
Your system may be set up such that a locked access door (such as in a lobby) can be unlocked momentarily or for a specific period of time, using a keypad command. Ask your installer if this has been done in our system.
Executing
There are several entries that can be entered at the keypad to activate this command:
1. Enter your security code + [0]. The door will unlock for 2 seconds.
2. Enter your security code + # + 73, or security code +
point. The door will unlock for a specific period of time.
#
+ 74 + access
3. Enter your security code +
#
+ 75 + access point + function. The
functions available are None, Grant, Protect and Bypass. Grant will temporarily unlock a door to allow an access. Protect will cause a door to unlock only when a valid access is received. Bypass will cause a door to be permanently unlocked to allow continuous access.
4.Access control functions may also be executed use your security code + + 77. See Using #77 Instant Activation Mode later in this manual.
