Bypassing Protection Zones (cont’d)
Quick Bypass
Your system allows you to easily bypass all open (faulted) zones without having to enter zone numbers individually.
NOTE: All bypasses are removed when an OFF sequence (security code plus OFF) is performed.
To use the Quick Bypass feature:
BYPASS
1. Enter your security code and press
6
then press
#
.
2.
BYPASS 007 FRONT UPSTAIRS BEDROOM
Typical bypass message
In a few moments, all open zones will be displayed along with the word BYPASS. Wait for these zones to be displayed before arming. Arming the system before bypassed zones are displayed eliminates all bypasses.
3.
DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad displays the "ready" to arm message. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed.
Viewing Bypassed Zones
The system allows you to view bypassed zones that are presently bypassed regardless of the status of the partition (armed, disarmed, etc.). To view bypassed zones.
1.Enter your security code + # + 84.
2.All zones presently bypassed are automatically scrolled for display.
– 30 –