Manuals / Honeywell / Household Appliance / Home Security System

Honeywell VISTA128BPT Security Codes and Authority Levels cont’d, MULTI-ACCESS? 0 = NO , 1 = YES

Models: VISTA250BPT 128BPTSIA VISTA128BPT

1 80

Download 80 pages 21.98 Kb

Page 19

MULTI-ACCESS ? 0 = NO , 1 = YES

Security Codes and Authority Levels (cont’d)

MULTI-ACCESS ? 0 = NO , 1 = YES

GLOBAL ARM ? 0 = NO , 1 = YES

PART.2 - SHOP? 0 = NO , 1 = YES

PART. 1 A0* WHSE USER 003 AUTH=3G.

If you as a user have access to other partitions, the keypad will prompt for ability of this new user to access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user.

Press 1 (YES) if this user will be allowed to try to arm more than one partition at the same time. Press 0 if this user will arm only his assigned partition.

The keypad now prompts for the user’s access to the next partition (see GOTO command). Again press 0 or 1. If yes, the system will automatically assign a user number for use in that partition and will prompt for authority level and global arm options for this user within the partition (see previous steps).

When all partitions have been displayed, the keypad will scroll through the partition(s) to which access has been assigned, and will display the user number, authority level and global arm option for each. The “G” after the authority level indicates that the global arm feature is active for this user in the displayed partition. The "*" indicates the partition from which this user can be changed or deleted. The "." at the end of the second line indicates that this user sends open/close reports. Open/close reporting is automatically active for any users added by you, if you have open/close reporting active.

– 19 –

Image 19

Honeywell VISTA128BPT, VISTA250BPT, 128BPTSIA Security Codes and Authority Levels cont’d, MULTI-ACCESS? 0 = NO , 1 = YES

Contents

Commercial Burglary Partitioned Security System VISTA-128BPT VISTA-250BPT VISTA-128BPTSIAWith Scheduling User Guide Page TABLE OF CONTENTS Page General System OverviewZones AlarmsSystem Overview cont’d A Partitioned SystemSystem Overview cont’d Memory of AlarmBurglary Protection Features For Each Arming ModeSpeed Key Macros Using SchedulesDevice Timers To Access another Partition GOTO CommandPhone Access & Voice Response Capability Self-HelpFeatureSystem Overview cont’d The Alpha Keypad About The KeypadsGeneral LEDS Functions of the KeypadB CD SPEAKERindividual Functions of the Keypad cont’d6 BYPASS RemovesFunctions of the Keypad cont’d General Information Entry/Exit DelaysQuick Arming Installer Code LockoutSecurity Codes and Authority Levels Duress CodeAuthority Levels Security Codes and Authority Levels cont’dTo Exit User Edit Mode General Rules on Authority Levels and ChangesSecurity Codes and Authority Levels cont’d Security Codes and Authority Levels cont’d To Add a UserCODE PART.2 - SHOP? 0 = NO , 1 = YES MULTI-ACCESS? 0 = NO , 1 = YESSecurity Codes and Authority Levels cont’d GLOBAL ARM ? 0 = NO , 1 = YESSecurity Codes and Authority Levels cont’d To Change a Users CodeSecurity Codes and Authority Levels cont’d To Delete a UserARM P 1 2 3 4 5 6 7 8 HIT Accessing Other PartitionsTo Access another Partition Global ArmingGlobal Arming Notes Accessing Other Partitions cont’dMaster Keypad Operation WHSE DISARMED HIT ∗ FOR FAULTS Accessing Other Partitions cont’dFAULT 002 LOADING DOCK WINDOW Accessing Other Partitions cont’d Common Lobby OperationOther Methods of Arming/Disarming How User Codes Affect the Common LobbyCodes with “Global” Arming Codes with “Non-Global”ArmingChecking For Open Zones Using theTo show faulted zones Typical fault displayREADY Key Displaying All Zone Descriptorsdescriptors can be displayed Using the6 BYPASS Key Bypassing Protection ZonesUsing the Viewing Bypassed Zones To use the Quick Bypass featureBypassing Protection Zones cont’d Quick BypassGroup Bypass To use the Group Bypass featureBypassing Protection Zones cont’d Bypassing Protection Zones cont’d Zones Remaining Bypassed After DisarmingUsing the With Entry Delay ONArming Perimeter Only STAY keyAuto-STAYArming With Entry Delay ON cont’dArming Perimeter Only Arming Perimeter Only With Entry Delay OFFINSTANT Key Using theArming All Protection Using the 2 AWAY KeyWith Entry Delay ON Arming All Protection MAXIMUM KeyWith Entry Delay OFF Using theQuick Exit Using the # + 9 KeysTo Quick Exit the premises Using the 1 OFF Key Disarming and Silencing AlarmsMemory of Alarm To arm in the STAY mode, turn the Using the KeyswitchArming Disarming9 Key Chime ModeUsing the General Information Viewing Alarm Company MessagesPanic Keys Using Panic KeysActive Panic Functions Defining Speed Key MacrosGeneral Information Executing Speed Key Macros cont’dGeneral Information Access Door ControlExecuting General Information Using #70 Relay Menu ModeDelaying the Closing Time Using SchedulesTemporary Open/Close Schedules Programming Temporary Schedules Using Schedules cont’dTo program temporary schedules DAYS ? MTWTFSS HIT Using Schedules cont’dTo enter the device timer menu mode Programming Device TimersGeneral Information Programming Device Timers cont’d Programming Device Timers cont’d Randomize Output Device TimesAction Code Using #77 Instant Activation ModeAction Code Action SpecifierAction Code Using #77 Instant Activation Mode cont’dAction Code Action SpecifierAction Code To enter the Instant Activation ModeUsing #77 Instant Activation Mode cont’d Additional CommandsTypical Event Log Display Event Log Procedures1.Enter CODE + # + 6 + 2.Select the display mode 3.Select the partitionTypical Event Log Procedures continuedALARM EVENT LOG 5.To EXIT the Event Log Press ∗ at any timeSetting the Time and Date Using the Testing the System To Be Conducted WeeklyTesting Your System TEST KeyIn Case Of Fire Alarm Fire Alarm SystemSilencing a Fire Alarm Typical Trouble Displays Trouble ConditionsTrouble Conditions cont’d Power FailureSERVICING INFORMATION Recommendations for Smoke and Heat Detectors Recommendations for Proper ProtectionRecommendations for Proper Intrusion Protection Recommendations for Proper Protection cont’dIn addition, we recommend the following Emergency Evacuation Maintaining Your System Replacing Batteries in Wireless SensorsTaking Care of Your System Maintaining Your System cont’d Silencing Low Battery Warning Tones at the KeypadRoutine Care COMMENTS Quick Guide to System FunctionsPROCEDURE FUNCTIONCOMMENTS Quick Guide to System Functions cont’dPROCEDURE FUNCTIONa. DISARM SYSTEM OR ALARM WILL OCCUR is Summary of Audible NotificationAlpha Display Keypads c. DISARM SYSTEM OR ALARM WILL OCCUR isINDUSTRY CANADA CLASS B STATEMENT IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMSFEDERAL COMMUNICATIONS COMMISSION STATEMENTS FCC CLASS B STATEMENTPage DOC STATEMENT CANADIAN DEPARTMENT OF COMMUNICATIONSTHE LIMITATIONS OF THIS ALARM SYSTEM Index Page TWO YEAR LIMITED WARRANTY Page 2 Corporate Center Drive, Suite Ê800-06905EŠP.O. Box 9040, Melville, NY