dup | mon |
channel/ | volume |
scan |
|
charge 1 | charge 2 |
| Power Point |
Place the UH039P into the charge cradle. The charge light will come on to indicate the unit is charging. Before operating the UH039P, charge the battery pack for 16 hours.
Do not charge alkaline or non rechargeable batteries.
BELT CLIP
To attach the belt clip:
Slide the belt clip until it snaps into place. Belt Clip Locker
To remove the belt clip:
To remove the belt clip, press and hold belt clip locker, slide the belt clip at the same time until released.
LOW BATTERY ALERT
If the battery level becomes low, the battery indicator icon on the LCD begins flashing.
When the batteries in the unit are low, the unit will go into a Battery Low mode. The Transmit mode is disabled. Replace the alkaline batteries immediately or if you are using the NiMH battery pack, place the radio on the charge cradle to recharge to continue using the radio.
3