Uniden UH039P manual Operation, Power ON/OFF, Volume, Adjusting the KEY Beeps, Roger Beep

Page 5

OPERATION

POWER ON/OFF

Press and hold to turn the radio on. A channel number will appear on the display.

Press and hold to turn the radio off.

VOLUME

Press volume or to increase or decrease the volume level.

'VOL' icon appears on the display while volume is being adjusted.

There are 8 volume levels. Level 0 (No Audio) to Level 7 (Maximum Volume).

 

VOL

hi/lo

 

dup

mon

channel/

volume

scan

 

ADJUSTING THE KEY BEEPS

Your radio emits a beep each time one of the keys (except for the PTT button) is pressed.

To turn OFF this beep: Press and hold dup while turning on the radio.

To turn ON this beep: Press and hold dup while turning on the radio.

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off. However, Roger Beep will not be heard from the speaker.

To turn OFF Roger Beep: Press and hold channel/scan while turning on the radio.

To turn ON Roger Beep: Press and hold channel/scan while turning on the radio.

4

Image 5
Contents UH039P Included in Your Package Control & IndicatorsGetting Started Battery InstallationInstalling the Charge Cradle Belt Clip LOW Battery AlertVolume Power ON/OFFAdjusting the KEY Beeps OperationTo Transmit and Receive Selecting ChannelMonitor Automatic Squelch FeatureOperation with the aid of a Repeater To Operate in Duplex Mode RepeatersScanning VOX Reply DelayUHF Channels & Frequencies Uniden UH039P UHF CB Radio Warranty