Uniden UH039P manual To Operate in Duplex Mode Repeaters, Operation with the aid of a Repeater

Page 8

TO OPERATE IN DUPLEX MODE (REPEATERS)

The Duplex function enables you to access local repeater stations. You can only activate Duplex from CH01-CH08.

UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions.

Contact your retailer for a list of repeaters available in your area.

Operation with the aid of a Repeater

Press dup momentarily. The 'DUP' icon appears.

DUP

Press dup again to deactivate the duplex operation. UH039P will return to normal operation.

If dup is pressed when the channel is not from CH01 - CH08, an error tone sounds.

7

Image 8
Contents UH039P Control & Indicators Included in Your PackageGetting Started Battery InstallationInstalling the Charge Cradle LOW Battery Alert Belt ClipPower ON/OFF VolumeAdjusting the KEY Beeps OperationSelecting Channel To Transmit and ReceiveAutomatic Squelch Feature MonitorTo Operate in Duplex Mode Repeaters Operation with the aid of a RepeaterScanning Reply Delay VOXUHF Channels & Frequencies Warranty Uniden UH039P UHF CB Radio