Uniden UH039P manual Selecting Channel, To Transmit and Receive

Page 6

SELECTING CHANNEL

Press channel/scan or to select the desired channel.

hi/lo

 

dup

mon

channel/

volume

scan

 

TO TRANSMIT AND RECEIVE

The UH039P uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed on page 10.

1.Before you transmit, listen for activity on the selected channel.

2.When the channel is clear, press and hold the PTT to transmit. 'TX' appears on the LCD.

PTT

Switch

TX

hi/lo

dup mon

channel/

volume

scan

 

Hold the radio with microphone approximately 5 cm in front of your mouth with the antenna at approximately 45° angle away from your head. Speak in a clear, normal conversational voice.

3.When you have finished speaking, release the PTT and listen for a response. 'TX' then disappears on the LCD. While receiving, the 'RX' icon is displayed.

5

Image 6
Contents UH039P Control & Indicators Included in Your PackageBattery Installation Installing the Charge CradleGetting Started LOW Battery Alert Belt ClipAdjusting the KEY Beeps Power ON/OFFVolume OperationSelecting Channel To Transmit and ReceiveAutomatic Squelch Feature MonitorTo Operate in Duplex Mode Repeaters Operation with the aid of a RepeaterScanning Reply Delay VOXUHF Channels & Frequencies Warranty Uniden UH039P UHF CB Radio