Uniden D1789-2, D1789-12, D1789-11 manual Screening Your Calls, Using the Answering System Remotely

To...	From the base	From a handset
restart this	Wait at least 5 seconds after the message starts playing,
message	press Phonebook.	Press 1 (number key).
replay an	Within 2 seconds after a message starts playing,
earlier	press Phonebook.	Press 1 (number key).
message
skip a	Press CID.	Press 3 (number key).
message
delete a	While a message is playing, press Delete.	While a message is playing,
message		press 4 (number key).
delete all	With the phone in standby, press Delete;	Not available.
messages	press Delete again to confirm.
play old	After the system plays all new messages,
messages	press Play/stop again.	Press 2 (number key).
stop	Press Play/stop.	Press 5 (number key).
playback

Screening Your Calls

You can use the answering system for call screening. While the system takes a message, you can listen on the base speaker (if you turn on Call Screen) or from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby.

To...	From the base	From a handset
hear the caller leaving a	Listen to the caller over	Press Message/mute.
message	the speaker.
answer the call	Pick up the corded	Press HOME/flash.
	handset.
mute the call screen without	Press Play/stop.	Press End or return the
answering*		handset to the charger.
##If you mute the call screen,	the system continues taking	the message; it just stops
playing through the speaker.

Using the Answering System Remotely

You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a Security Code

With the phone in standby, open the menu; select Answering Setup/Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press select on the base or MENU/ SELECT on the cordless handset when you’re finished.

##Remember to make a note of your new security code!

22 - English