Uniden D1789-11 Resetting Stations, Registering Handsets, Installing a Line Filter or DSL Filter

Page 25

Bluetooth problems

Possible solutions

The D1789 doesn’t

xx Making sure your cellular phone has Bluetooth turned on.

xx Making sure your cellular phone is in range of the base.

ring when my

xx Making sure the station’s ringer is not turned off. (The base doesn’t

cellular phone does.

ring on cellular calls.)

 

The D1789 paired

xx Adjusting the volume.

xx Setting your cellular phone to transfer the audio to a Bluetooth

with my phone, but

device. Check your phone’s manual for instructions on Bluetooth

I can’t hear anything

setup and options.

through the station.

xx Erase the Bluetooth pairing and repair the cellular phone to the

 

base. To erase the Bluetooth pairing, see page 14.

Installing a Line Filter or DSL Filter

A telephone line filter or DSL filter prevents services that use the phone line from causing interference on your phone. To get a line filter, contact your service provider or look in an electronics store. Plug the filter into the telephone wall jack and plug the base into the filter. Make a test call to make sure the noise is gone.

Liquid Damage

CAUTION: If the base is covered in liquid, disconnect the adapter & phone cord from the wall before touching it.

If the liquid is only on the exterior housing of the base or handset, wipe it off and use as normal. If you can hear liquid inside the housing:

1.Remove all compartment covers, and disconnect all cables and cords.

2.If liquid is leaking from any vent or hole, turn the phone so that the vent faces down. If not, place the largest vent face down.

3.Let dry for at least 3 days. Check for liquid inside the phone before replacing compartment covers & reconnecting cords.

Resetting Stations

If you have problems with the base, unplug it to reset it. Plug it back in after at least a minute. If you have problems with a cordless handset or want to replace one, reset it:

1.Press & hold END and # at the same time until you see the System Reset menu.

2.If you still have the base the handset is registered to, select Deregister HS, then select the handset you want to reset. If you don’t have that base anymore, select Base Unavailable.

3.To confirm, select Yes. The handset displays Handset not registered.

Registering Handsets

If Handset not registered displays on a handset, register the handset to a base before using it.

1. On the base, open the menu and select Register Accy.

2. On the handset, press and hold # until the handset displays Registering.

3. Wait until the display says Registration Completed (about 30 seconds), then pick up the handset; press home/flash.

##If you don’t hear a dial tone or the display says Registration Failed, charge the battery completely, then try again.

English - 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Whats in the box? You will also find D1789 Series Users GuideIf You Contact Uniden’s Phone Number What’s in the manual? Important Safety InstructionsGetting Started Set Up the BaseInstall and Charge the Battery Set Up the Accessory HandsetsTest the Connection Changing to Pulse DialingPair your Bluetooth phone Setting Up the CellLink Bluetooth ConnectionTo test the connection Getting to Know Your Phone Using the D1789 with multiple Bluetooth phonesParts of the Base Key icon What it doesXx In standby increase the ringer volume Xx When entering text move the cursor to the leftXx When entering text move the cursor to the right Xx In standby decrease the ringer volumeParts of the Handset Xx Switch a normal call to the speakerphone and backXx In the menu or any list select the highlighted item Xx While the landline is ringing answer the incoming callIcon What it means Reading the DisplaysBluetooth Setup Menu Using the MenusIntercom Menu Handset Menu Only Answering Setup Menu Base Setup Menu Base Menu OnlyHandset Menu Only Date & Time MenuGlobal Setup Menu Using Your PhoneMaking Landline Calls Register Accy. Menu Base Menu OnlyHold/Transfer Making Bluetooth CallsTransfer Select Hold/Transfer Then selectUsing the Caller ID and Redial Lists Changing the Volume#* #Press * a third time to return to normal mode Using Call WaitingPhonebooks To… PressAdding Phonebook Entries Using the PhonebookDownloading Cellular Phonebooks Off-Hook Menus Using Special FeaturesDeleting All the Phonebook Entries Hold/Transfer MenuCall Privacy Menu Multistation FeaturesConference Calling IntercomChain Dialing Silent ModeVoice Message Notification From the base, pressUsing Your Phone During a Power Failure Using the Answering SystemAnswering System Options Answering Setup Menu Finding a Lost HandsetPersonalizing the Greeting Accessing the Answering SystemFollow these steps GreetingsScreening Your Calls Using the Answering System RemotelyProgramming a Security Code Playing through the speakerImportant Information Solving ProblemsDialing In to Your System Multistation problems Possible solutions Caller ID problems Possible solutionsInstalling a Line Filter or DSL Filter Resetting StationsRegistering Handsets Liquid DamageBattery pack with normal use Adapter and Battery Information AC adapter Base ChargerRechargeable Battery Warning Compliance Information FCC Part 68 InformationFCC RF Exposure Information FCC Part 15 InformationIndustry Canada I.C. Notice English
Top Page Image Contents