Kenwood TK-3130 instruction manual Make a Call

You can change the frequency of each channel:

1Turn the transceiver power OFF.

2Press and hold the MENU key while turning the transceiver ON (for 1 second).

3Press the ▲ or ▼ key to select the frequency setting menu.

•The channel number appears with “F” and the current frequency number.

4Press the MENU key to select “1-F1” (channel 1, frequency number 1) to “1-F8” (channel 1, frequency number 8) or “2-F1” (channel 2, frequency number 1) to “2-F8” (channel 2, frequency number 8).

•Refer to page 31 for the frequencies available for each channel.

5Press the PTT, MON, or CAL key to exit Menu Mode.

rMake a Call.

1Press and release the CAL key to alert the other parties that you are making a call.

•A call tone will sound on the other party’s transceiver.

2Press and hold the PTT switch, then speak into the microphone to transmit.

•The LED lights red while transmitting.

•For best sound quality, speak into the microphone in your normal speaking voice while holding the microphone approximately 1.5 inches (3 to 4 cm) from your lips.

3Release the PTT switch when you have finished speaking.

10