Kenwood TK-3130 Voice Activated Control VOX, To stop transmitting, stop speaking

VOICE ACTIVATED CONTROL (VOX)

Using the VOX feature, you can operate the transceiver hands-free. In order to use this feature, however, you must use an optional headset; VOX will not function with the built-in mircrophone. For best operation conditions, we recommend you use an optional headset with both an ear piece and a microphone on a boom that rests in front of your mouth.

With VOX activated, your voice level will determine when the transceiver transmits. Because of this, you must take care that the ambient noise around you is not so loud that it causes the transceiver to transmit. Due to the automatic switching between transmission and reception, we recommend you set the VOX gain such that it will not activate transmission when in an area with excessive ambient noise.

To operate using VOX:

1Set up a VOX gain level from 1 to 3 (page 15).

2To transmit, simply speak into the microphone.

•You do not need to press the PTT switch; the transceiver automatically detects your voice and begins transmitting.

3To stop transmitting, stop speaking.

•Transmission will continue momentarily after you stop speaking. You can select the delay time as described on page 15.

4To exit VOX mode, set the VOX gain level (page 16) to “GL-OF” (OFF).

15