Operation
On/Off Power
Battery Low
Using Your Radio
Turning On Your microTALK® Radio • To Turn On Your Radio:
1.Press and hold the Power button until you hear a series of audible tones indicating the radio is On.
Your microTALK® radio is now in Standby Mode, ready to receive transmissions. The radio is always in Standby Mode except when the Talk, Call or Mode buttons are pressed.
Battery Low
When battery power is low, the Battery Low icon • will blink. Your batteries should be replaced or recharged, if using rechargeable batteries.
Battery Save Mode
Talk Button
Auto Battery Save
•
Your microTALK® radio has a unique circuit designed to extend battery life. If there are no transmissions within ten (10) seconds, the radio will automatically switch to Battery Save Mode and Power Saver icon will flash in the display. This will not affect the radio’s ability to receive incoming transmissions.
Communicating with Another Person
To Talk To Another Person:
•
2 inches (5 cm) From Mouth
1.Press and hold the Talk button.
2.With the microphone about two (2) inches (5 cm) from your mouth, speak in a normal voice.
3.Release the Talk button when you are finished talking and listen for a response.
You cannot receive incoming calls while pressing the Talk button.
Both radios must be tuned to
the same channel to communicate.
6English