Cobra Electronics PR240 Scrolling Through Mode Function, PR 350 WX, Channels, To Select a Channel

Page 7

Introduction

Mode Button

Channel Button

Channel Number

 

 

 

Operation

Customer Assistance

Warranty

Scrolling Through

the Mode Function

By scrolling through the Mode function, you will be able to select or turn On preferred features of your microTALK® radio. When scrolling through the Mode function, your radio features will be displayed in the same predetermined order:

PR 240

Set Privacy Code

Set Channel Scan

Set Privacy Code Scan

Set Call Tones

Set “Roger Beep” On/Off

PR 350 WX

Set Privacy Code

Set NOAA All Hazard Radio Channels

Set NOAA All Hazard Alert

Set Channel Scan

Set Privacy Code Scan

Set Call Tones

Set “Roger Beep” On/Off

Channels

To Select a Channel:

1.With the radio On, select any of the

22 channels by pressing the Channel Up or Channel Down button.

Both radios must be tuned to the same channel to communicate.

Channels 1 through 7 are shared with FRS/ GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.

See page 17 for FRS/GMRS frequency allocations and compatibility charts.

Nothing comes close to a Cobra7

Image 7
Contents PR240 PR350WX English and Spanish a.m. to 600 p.m. CT For Assistance In the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features Backlit LCD Display FeaturesCaring for Your microTALK Radio To Install or Replace BatteriesBatteries Communicating with Another Person Battery LowAuto Battery Save Turning On Your microTALK Radio To Turn On Your RadioTo Select a Channel Scrolling Through Mode FunctionPR 350 WX ChannelsListening for a Response When You are Finished TalkingCtcss Privacy Codes To Select a Privacy CodeNOAA* All Hazards Radio Channels and Alert PR 350 WX only Volume To Adjust the VolumeCall Button Press and release the Call buttonTo Listen to All Hazards Radio Channels PR 350 WX only Press the Mode button to proceed to other functionsUse the Channel Up or Channel Down To Scan Main Channels ScanDuring this time, you can To Scan Privacy Codes To Turn Roger Beep On or Off Call Tone SettingsTo Change a Call Tone Setting Roger Beep Confirmation ToneAuto Squelch/Maximum Range Display IlluminationPress the Light/Max Range button less than five 5 seconds Insert the plug into the Speaker/ Microphone jack Lock FunctionPress and hold the Lock button for two 2 seconds To Attach Your Speaker/MicrophoneYour microTALK radio has a range MicroTALK RangeFRS/GMRS Frequency Allocation and Compatibility General SpecificationsLicensing, Assistance & Warranty Product Service Questions Accessories & Order Form Page Page Page Page Page Page Page Page Page