Cobra Electronics PR240, PR350WX owner manual Volume To Adjust the Volume, Call Button

Page 9

Introduction

Volume Button

Volume Level

Call Button


Operation	Customer Assistance	Warranty

Volume

•

To Adjust the Volume:

1.Press the Volume Up or Volume Down button.

A double beep sound is used to indicate the minimum and maximum volume levels (L1 through L7).

Call Button

•

To Alert Another Person That You Are Calling:

1. Press and release the Call button.

The other person will hear a two (2) second call tone. You cannot send or receive transmissions during the two (2) second call tone.

See page 13 on how to select between ten (10) call tone settings.

Hazards Radio Icon

NOAA* All Hazards Radio Channels and Alert (PR 350 WX only)

Hazards Alert Icon

You can use your microTALK® radio to listen to NOAA All Hazards Radio channels transmitting in your area.

You can also program your microTALK®

radio to sound a tone alert when a local NOAA channel activates an Emergency All Hazards Alert. This will warn you of weather, chemical, and other civilian emergencies.

*National Oceanographic and Atmospheric Administration

•

Nothing comes close to a Cobra™ 9

Image 9

Contents PR240 PR350WX Automated Help Desk For Assistance In the U.S.ACustomer Assistance Operators English and Spanish a.m. to 600 p.m. CTProduct Features Backlit LCD Display FeaturesTo Install or Replace Batteries Caring for Your microTALK RadioBatteries Auto Battery Save Battery LowTurning On Your microTALK Radio To Turn On Your Radio Communicating with Another PersonPR 350 WX Scrolling Through Mode FunctionChannels To Select a ChannelCtcss Privacy Codes When You are Finished TalkingTo Select a Privacy Code Listening for a ResponseCall Button Volume To Adjust the VolumePress and release the Call button NOAA* All Hazards Radio Channels and Alert PR 350 WX onlyPress the Mode button to proceed to other functions To Listen to All Hazards Radio Channels PR 350 WX onlyUse the Channel Up or Channel Down Scan To Scan Main ChannelsDuring this time, you can To Scan Privacy Codes To Change a Call Tone Setting Call Tone SettingsRoger Beep Confirmation Tone To Turn Roger Beep On or OffDisplay Illumination Auto Squelch/Maximum RangePress the Light/Max Range button less than five 5 seconds Press and hold the Lock button for two 2 seconds Lock FunctionTo Attach Your Speaker/Microphone Insert the plug into the Speaker/ Microphone jackYour microTALK radio has a range MicroTALK RangeFRS/GMRS Frequency Allocation and Compatibility General SpecificationsLicensing, Assistance & Warranty Product Service Questions Accessories & Order Form Page Page Page Page Page Page Page Page Page