Cobra Electronics PR350WX Ctcss Privacy Codes, To Select a Privacy Code, Listening for a Response

Page 8

Operation

38 Privacy Codes

Mode Button

Privacy Code

Channel Button

Listening

Using Your Radio

CTCSS Privacy Codes

CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce interference from other users on the channel.

If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected.

To Select a Privacy Code:

1.After selecting a channel, press the Mode button until the small numbers next to the channel number flash on the LCD.

2.Press the Channel Up or Channel Down button to select a privacy code. You can hold the Up or Down button for fast advance.

3.When your desired privacy code is displayed:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock button to enter the new setting and return to Standby Mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby Mode.

Listening for a Response

When You are Finished Talking:

8 English

1.Release the Talk button to receive incoming transmissions. Your microTALK® radio is always in Standby Mode while the Talk or Call buttons are not pressed.

Image 8
Contents PR240 PR350WX For Assistance In the U.S.A Automated Help DeskCustomer Assistance Operators English and Spanish a.m. to 600 p.m. CTProduct Features Features Backlit LCD Display Batteries To Install or Replace Batteries Caring for Your microTALK Radio Battery Low Auto Battery SaveTurning On Your microTALK Radio To Turn On Your Radio Communicating with Another PersonScrolling Through Mode Function PR 350 WXChannels To Select a ChannelWhen You are Finished Talking Ctcss Privacy CodesTo Select a Privacy Code Listening for a ResponseVolume To Adjust the Volume Call ButtonPress and release the Call button NOAA* All Hazards Radio Channels and Alert PR 350 WX onlyUse the Channel Up or Channel Down Press the Mode button to proceed to other functionsTo Listen to All Hazards Radio Channels PR 350 WX only During this time, you can ScanTo Scan Main Channels To Scan Privacy Codes Call Tone Settings To Change a Call Tone SettingRoger Beep Confirmation Tone To Turn Roger Beep On or OffPress the Light/Max Range button less than five 5 seconds Display IlluminationAuto Squelch/Maximum Range Lock Function Press and hold the Lock button for two 2 secondsTo Attach Your Speaker/Microphone Insert the plug into the Speaker/ Microphone jackMicroTALK Range Your microTALK radio has a rangeGeneral Specifications FRS/GMRS Frequency Allocation and CompatibilityLicensing, Assistance & Warranty Product Service Questions Accessories & Order Form Page Page Page Page Page Page Page Page Page