Cobra Electronics PR260 WXC owner manual To Set VOX Sensitivity, Channel Scan, To scan channels

Page 14

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

Mode/Power

To Set VOX Sensitivity:

1.Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed.

VOX Sensitivity Level

The current VOX sensitivity level is

 

 

displayed with letters “LE” and a Number

 

1 through 5, with Number 5 being the

 

most sensitive level and Number 1

 

being the least sensitive level.

Channel Button

 

 

2. Press the Channel Up or Channel Down

 

button to change the setting.

 

3. Choose one (1) of the following:

 

 

a. Press the Mode/Power button to enter

 

the selected setting and proceed to other

 

functions.

 

b. Press the Lock button to enter the selected

 

setting and return to Standby mode.

Channel Scan

•

Your microTALK® radio can automatically scan channels.

Mode/Power

To scan channels:

1.Press the Mode/Power button until the Scan icon and the channel numbers appear on the display.

Scan Channels

Channel Button

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

While setting channel scan, if you do not press any buttons for 15 seconds your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

9

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PR260 WXC Automated Help Desk Making Life Easier and SaferFor Assistance in Canada or the U.S.A Customer Assistance OperatorsProduct Features Features Belt ClipWarranty Limited One-Year Warranty on Radios & ChargerRadio Charger Jack To charge batteries in radio Replace battery compartment cover and belt clipCaring for Your microTALK Radio Check to see that the batteries have been inserted properlyTo connect a wall charger/adapter Using Your RadioSpeaker/Microphone/Charge Jack To attach a speaker/microphoneAuto Battery Save Communicating with Another PersonListening for a Response To Adjust Volume Press the Volume Up or VolumeTo Select a Channel Call ButtonTo turn maximum range extender off Light/Max Range To temporarily turn off auto squelchTo turn maximum range extender on Lock Function Your range will vary depending on terrain and conditions Scrolling Through the Mode Function MicroTALK Range Set Privacy CodeCtcss Privacy Codes To select a privacy codeNOAA* All Hazards Radio Channels Mode FunctionsTo turn VOX mode on or off To listen to all hazards radio channelsTo scan channels To Set VOX SensitivityChannel Scan This will return the radio to Standby mode Privacy Code Scan To scan privacy codesPress the Mode/Power button to proceed to other functions If you press the Talk button while scanning and not withinOn or off setting is displayed Five Call Tone SettingsTo change a call tone setting Roger Beep Confirmation ToneGeneral Specifications and Licensing General SpecificationsLicensing Normal Position Safety and Trademark AcknowledgementSafety Information for microTALK Radios Product Service
Top Page Image Contents